Hermes' cIOSs (202, 222 - 224)

This page contains optional/additional steps.

Installing the cIOSs listed below is only done to increase compatibility.

Check out the main cIOS installation guide first. Those steps are REQUIRED to use the guide below.

The new cIOS D2X (from the guide linked above) already has a very high compatibility. It is probably not needed to follow the guide below.

Required

  • An SD card (Best results are with non-SDHC cards, SDHC will only work on 4.0 or above) or USB device formatted to FAT(32).

  • You must have a patched IOS236 or cIOS installed.

Links (choose 1 of the below)

Guide

The guide now supports v4 and v5. You only need to run one of them, not both (unless you really want to combine them).

Offline NUS Downloads

Computer ----------------------

Version 4

1. Start the NUS downloader. Be sure that Pack wad is NOT selected. Download the following files through the database:

  • IOS > IOS 37 > v3612

  • IOS > IOS 38 > v3610

  • IOS > IOS 60 > v6174 -> Download this version and NO other. This is the ONLY non-stub IOS60!

2. Time to copy the files. You need to make the folders yourself.

  • Copy the contents of the new folder titles/0000000100000025/3612 to SD:/00000001/00000025/V3612/ (or USB:/00000001/00000025/V3612/)

  • Copy the contents of the new folder titles/0000000100000026/3610 to SD:/00000001/00000026/V3610/ (or USB:/00000001/00000026/V3610/)

  • Copy the contents of the new folder titles/000000010000003C/6174 to SD:/00000001/0000003C/V6174/ (or USB:/00000001/0000003C/V6174/)

Version 5

1. Start the NUS downloader. Be sure that Pack wad is NOT selected. Download the following files through the database:

  • IOS > IOS 37 > v3869

  • IOS > IOS 38 > v3867

  • IOS > IOS 57 > v5661

  • IOS > IOS 60 > v6174 -> Download this version and NO other. This is the ONLY non-stub IOS60!

2. Time to copy the files. You need to make the folders yourself.

  • Copy the contents of the new folder titles/0000000100000025/3869 to SD:/IOS/00000001/00000025/V3869/ (or USB:/IOS/00000001/00000025/V3869/)

  • Copy the contents of the new folder titles/0000000100000026/3867 to SD:/IOS/00000001/00000026/V3867/ (or USB:/IOS/00000001/00000026/V3867/)

  • Copy the contents of the new folder titles/0000000100000039/5661 to SD:/IOS/00000001/00000039/V5661/ (or USB:/IOS/00000001/00000039/V5661/)

  • Copy the contents of the new folder titles/000000010000003C/6174 to SD:/IOS/00000001/0000003C/V6174/ (or USB:/IOS/00000001/0000003C/V6174/)

Guide

Computer ----------------------

1. Download the cIOS222 installer of your choice and extract it to the apps folder on the SD card/USB device

Wii ----------------------

Version 4

* Unplug ALL Gamecube memory cards and controllers.

2. Run the cIOS222/223 Installer with the HBC. Use IOS249 if it asks so. (If this doesn't work, you can try IOS236 if you have it installed)

We advise you to install the following IOSs with these merges:

  • IOS222 with base IOS38 merged with 37

  • IOS223 with base IOS38

  • IOS202 with base IOS38 merged with 60

The installer will quit after each install, so you'll have to choose it again from the HBC after each install.

Version 5

* Unplug ALL Gamecube memory cards and controllers.

2. Run the cIOS222/223 Installer with the HBC. Use IOS249 if it asks so. (If this doesn't work, you can try IOS236 if you have it installed)

We advise you to install the following IOSs with these bases:

  • IOS222 with base IOS38

  • IOS223 with base IOS37

  • IOS224 with base IOS57

  • IOS202 with base IOS60

The installer will quit after each install, so you'll have to choose it again from the HBC after each install.