List of references - Bibilographie

G.Gary, Dynamic Buckling of an Elastoplastic Column. Int. J. Impact Engng., 1 (1983), 357-375

G.Gary, W.K.Nowacki. Essai de cisaillement plan appliqué à des tôles minces, Journal de Physique IV, 4(1994), C8, 65-70

H.Zhao, G.Gary, A three dimensional longitudinal wave propagation in an infinite linear viscoelastic cylindrical bar. Application to experimental techniques, J. Mech. Phys. Solids, 43(1995), 1335-1348.

H.Zhao, G.Gary, On the use of SHPB technique to determine the dynamic behavior of the materials in the range of small strains, Int. J. Solid. & Structure. 33(1996), 3363-3375.

H.Zhao, G.Gary, J.R. Klepaczko, On the use of a viscoelastic split Hopkinson pressure bar, Int. J. Impact Engng. 19(1997), 319-330.

Pierre MOURO Gérard GARY and Han ZHAO, Dynamic tensile testing of sheet metal. Journal de Physique IV, 10(2000), C5, 149-153.

Marie-Noëlle Bussac, Pierre Collet, Gérard Gary, Ramzi Othman, An optimisation method for separating and rebuilding one-dimensional dispersive waves from multi-point measurements. Application to elastic or viscoelastic bars, J. Mech. Phys. Solids, Vol 50, No 2, pp321-350, 2002

Marie-Noëlle Bussac, Robert H. Blanc, Pierre Collet, Gérard Gary, Ramzi Othman, Identification de la relation de dispersion dans les barres, C.R. Acad. Sci. Paris. 330,(2002),849-855.

D. Mohr, G.Gary, M-shaped specimen for the high strain rate tensile testing using a Split Hopkinson pressure bar apparatus, Experimental Mechanics 47(5), 2007,681-692.

M.N. Bussac, P. Collet, G. Gary, B. Lundberg, S. Mousavi Viscoelastic impact between a cylindrical striker and a long cylindrical bar Int J. of Impact Engineering. Vol 35 (4), 2008, 226-239

V. Grolleau, G. Gary, D. Mohr Biaxial Testing of Sheet Materials at High Strain Rates Using Viscoelastic Bars, Experimental Mechanics ,vol 48, N°3, 2008, 293-306.

Forquin, P.; Safa, K.; Gary, G.; Influence of free water on the quasi-satic and dynamic strength of concrete in confined compression tests, CEMCON-04023, Cement and Concrete Research, (2009)

Mohr, Dirk; Gary, G.; Lundberg, Bengt; Evaluation of Stress-strain Curve Estimates in Dynamic Experiments, IE-D-08-00215R1, International Journal of Impact Engineering 37, 2010, 161-169

Safa, Kamal; Gary, G.; Displacement correction for punching at a dynamically loaded bar end, IE-1835, International Journal of Impact Engineering 37, 2010, 371-384