GBC LINKAGE INSTRUCTIONS
LEGO DIGITAL DESIGNER WAS USED TO CREATE THESE BUILDING INSTRUCTIONS. For information or to download LDD for yourself, please visit http://ldd.lego.com/en-us
NOTE: COLOR OF THE ELEMENTS IS NOT RELEVANT TO THE FUNCTION OF THE LINKAGE.
You can open or download the actual PDF instructions generated by LEGO DIGITAL DESIGNER. PDF file
IF you can not open the PDF file, you can use the instructions on this page.
PARTS LIST
Completed Left side.
STEP 1 - LEFT SIDE, GATHER THESE
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6 - GATHER THESE
STEP 7
STEP 8
STEP 9 (rotate model)
STEP 10
STEP 11 rotate model and gather another 3 long blue connector pegs
STEP 12
STEP 13
STEP 14 gather these
STEP 15
STEP 16
STEP 17
STEP 18
STEP 19
STEP 20
STEP 21 gather another 3 long blue connector pegs (oops!)
STEP 22
STEP 23 (note the 15 hole beam is only connected to the blue connector on one side of the model)
STEP 24
STEP 25 gather this.
STEP 26 -- left side done..
STEP 27 -- Build a mirror image of the left side to make the right side. Omit the 2 black connectors and the axle extender from the right side of the model. They will connect the 2 side together.)
STEP 28 - put the 2 sides together. Note only one end of the 15 hole beams that make up the ramp are connected.
STEP 29 - rotate the ramp down until it looks like this, and you are done.