Super X-Drive SXD(Buck)

Super X-Drive Bucking Laser Drivers

Drivers PCB's are Flux Residue Free with Aqueous/Ultrasonic Cleaning Technology

Super X-Drive(SXD-V3)

$29

SXD Super X-Drive TTL control. These instructions are only if you plan to use TTL to control the driver. If you don't plan on using TTL the driver will work as is no need to modify anything.:)

PWN/TTL

Modulation Frequency: Up to 1kHz

Modulation Voltage 0-5V Full range: 1.6V ON "Max 12V" & 0.6V - 0V OFF

Solder the modulation Wire to the Yellow Arrow after removing the 10K.^^^^

Like SO:

Enable Pin is High "ON" Minimum 1.6V with an Ultimate MAX of 12V input

Enable Pin is Low "OFF"  0.6V or lower

12V MAX the enable pin can take.

Remove the Ramp Up Capacitor.