NUBM07 465nm Laser Diode
NUBM07 465nm Laser Diode
3.5A Recommended Operating Current.
Max Current: 4A
NUBM07 465nm Laser Diode
$50
NUBM07 465nm
12mm Copper Module W/Leads
$60
NUBM07 465nm
20mm Copper Module W/Leads
$65
NUBM07 465nm
25mm Copper Module W/Leads
$68
NUBM07 465nm
20mm Copper Module W/Driver
$110
NUBM07 465nm
25mm Copper Module W/Driver
$113
NUBM07 465nm Laser Diode
Power test with DTR-G-2
Copper Modules Are
C1100 99.9% Pure Copper
Lens Threading M9X0.5mm
12mm Copper Modules
20mm Copper Modules
25mm Copper Modules
20mm and 25mm module Driver Shelf Back Half
Machined pocket provides a shelf that can be used to thermally bond a compact laser driver.
Max dimensions 16.65mm X 12.00mm X 7.00mm
Drivers I carry that fit: ACS4500BU, ACS5500BU, ACS1500SE, LDSE500, Flexdrive, Nano, SXD Super X-Drive,
Drivers that can be thermally sinked by flat mounting.
20mm and 25mm Copper Modules W/Driver
Units can be powered with any 6.5V-12V Power Source(4A+ Discharge Capable)
Examples:Variable Power Supply, 9V/12V 4A+ Wall Adapter, Two 3.7V Li-Iion's In Series, ect...
Power & Stability Test DTR-G-2, 20mm Version Mounted In SK-20 XYZ Heatsink
PWN/TTL
Modulation Frequency: Up to 1kHz
Enable Pin is High "ON" Minimum 1.6V to a MAX of 12V
Enable Pin is Low "OFF" 0.6V or lower
12V MAX the enable pin can take.
CNC Engraving/Cutting.
Best option DTR-G-2 with a 30mm working distance from the aperture of the laser to the work with good ventilation.