1W NUGM01T 520nm Laser Diode

1W NUGM01 520nm Laser Diode

See this thread for more details

Max suggested current 2.2A.

If you get the diode in module with glass lens it will have the G-Ball can removed making the diode open can but you can also get the in module with leads which has two options one with the can removed so you can use glass lenses or the G-Ball intact which makes the unit a fixed focus laser. If you go with an option to remove the G-Ball It is more susceptible to particles or other things getting in the module when the lens is out so be conscious of this whenever you remove the lens as damage can occur if something gets in there.:)

NUGM01 1W 520nm Laser Diode

$110

Free US shipping on order over $50 or Express USPS $20. 

First Class International $14 "Not Tracked"(Offered On Orders Under $350 Orders Over will Default to DHL Express Tracked $55-$80)

Or

Express DHL 5-7 Day $55-$80

Check out can not calculate based on your address. You will be charged $80 when selecting Express which is the max and I will refund difference if there is any. Usually only remote deliver is the full $80 most destinations are around $60 and Mexico and Canada are about $50.

Shipping to Russia is via USPS Express Only for $65

Back Half and Lens Options

AL:Aluminum CU:Solid Copper Back Half CUHL:Solid Copper Half Length CUDS:Solid Copper With Driver Shelf

NL: No Lens 2EG: Two Element Glass Lens 3EG:Three Element Glass Lens G2: G-2 Glass Lens

All copper back half options make direct thermal contact with the base of 9mm diodes or the base of the copper diode mount on modules for 3.8mm/5.6mm diodes

Aluminum back halfs have for a free floating compact driver to be installed by connected directly to the pins where no additional driver heasinking is required

The 20mm and 25mm Copper with Driver Shelf options have a pocked machined to thermally bond a compact driver in the back of the module for higher current builds

All the drivers I carry except the Blackbuck 8M will work as a compact driver for the above configurations

1W NUGM01T 520nm Laser Diode

Finally got some free time and did some testing of the NUGM01T diode. This is with a G-2 lens ball lens removed. As others have noted this is slightly less powerful than the NDG7475 diode but not by much. The diode seems to have the same beam profile and divergence of the NDG7475. Looking at the dye it does have one less bond wire than the NDG7475 which possibly is why it is slightly less powerful.

https://www.youtube.com/watch?v=phNqm3Z9dr4

So the efficiency drops off pretty steep after 2.4A and a peak of just over 1400mW.

*Disclamer*

By purchasing these diodes you are agreeing to the following.

- You are over 18 years of age . 

- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product. 

- You will use these as components and properly incorporate them into a finished product. 

- You will use these diodes/modules in a safe and responsible manner and for a legal purpose. 

- You are legally responsible for the use of these components, improper use of these components or their end products. 

- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products. 

- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.