Oclaro 170mW 638nm Single Mode Laser Diode (HL63133DG)
Oclaro/Opnext 170mW 638nm Single Mode Laser Diode (HL63133DG)
Out of stock see 180mW Mitsubishi 638nm
Free US shipping on order over $50 or Express For $20.
First Class International $14 "Not Tracked"(Offered On Orders Under $350 Orders Over will Default to Express Tracked for $45)
Or
Express 5-7 Day $45
Opnext 170mW 638 Diode
$65
Opnext 170mW 638 Diode In Copper Module W/Leads
$74
Opnext 170mW 638 Diode In Copper Module W/Leads &
405-G-2 Glass Lens
$104
Opnext 170mW 638 Diode In Copper Module W/Leads &
Three Element Glass Lens
$79
Opnext 170mW 638 Diode In Copper Module W/Driver &
405-G-2 Lens
Power with 3.5-9V or one/two 3.7V Li-Ion(s)
$130
Opnext 170mW 638nm Diode In Copper Module W/Driver &
Three Element Glass Lens
Power with 3.5-9V or one/two 3.7V Li-Ion(s)
$105
Opnext 170mW 638nm 22mm Module W/Driver &
405-G-2
510 Threaded Connection
Power with 3.5-9V or one/two 3.7V Li-Ion(s)
$155
Opnext 170mW 638nm 22mm Module W/Driver &
Three Element Glass Lens
510 Threaded Connection
Power with 3.5-9V or one/two 3.7V Li-Ion(s)
$130
Oclaro 170mW 635nm Single Mode Laser Diode (HL63133DG)
Got some of the 2013 revision 4's of these diodes. Not sure they are really different but they seem much better than the last time I tested a previous revision of this diode. I remembered it LEDed running just a little over the max suggested current so I avoided them in the past. These are like a lot of newer diodes where thy can take a lot of abuse. Above 400mA there was no power increase and sat @ 250-260mW but even @ 550mA it was steady with no power drop.
First thing you notice is the diode has a fairly long can on it.
Here is the power test with a G-2.
[IMG]ttp://imagizer.imageshack.us/v2/1024x768q90/842/80zmi.jpg[/IMG]
*Disclamer*
By purchasing these diodes you are agreeing to the following.
- You are over 18 years of age .
- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.
- You will use these as components and properly incorporate them into a finished product.
- You will use these diodes/modules in a safe and responsible manner and for a legal purpose.
- You are legally responsible for the use of these components, improper use of these components or their end products.
- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.