07. Domestic Patent Application

  1. 김성, 김진혁, 마상범, "대유량 및 저양정의 설계사양을 만족하도록 자오면 형상 설계를 이용한 축류펌퍼의 임펠러 설계 방법, 이에 의하여 설계된 임펠러 및 펌프(Impeller Design Method of Axial Flow Pump Using Meridional Shape Design to Satisfy Design Specifications of High Flow Rate and Low Head, Impeller and Pump Designed Thereby)," 특허출원번호 10-2021-0111776, August 24, 2021.

  2. 김성, 김진혁, 마상범, "대유량 이송이 가능하고 수력학적 성능이 향상되도록 날개각 분포 설계가 적용된 축류펌프 임펠러 설계 방법, 이에 의하여 설계된 임펠러 및 펌프(Axial Flow Pump Impeller Design Method to Which Blade Angle Distribution Design is Applied to Enable Large Flow Transfer and Improve Hydraulic Performance, Impeller and Pump Designed Thereby)," 특허출원번호 10-2021-0111774, August 24, 2021.

  3. 김진혁, 김성, 마상범, "저유량 및 고양정을 만족하며 고형물 이송이 가능한 소용량 투베인 펌프 임펠러 및 벌류트 설계방법, 이에 의하여 설계된 투베인 펌프(A Method for Designing an Impeller and a Vloute Provided in a Small-Capacity Two-Vane Pump that Satisfies Large Flow Rate and High Head and Can Transport Solids, and a Two-Vane Pump Designed Thereby)," 특허출원번호 10-2021-0096372, July 22, 2021.

    1. 김진혁, 김성, 마상범, "대유량 및 고양정을 만족하며 고형물 이송이 가능한 투베인 펌프 임펠러 및 벌류트 설계방법, 이에 의하여 설계된 투베인 펌프(A Method for Designing an Impeller and a Vloute Provided in a Two-Vane Pump that Satisfies Large Flow Rate and High Head and Can Transport Solids, and a Two-Vane Pump Designed Thereby)," 특허출원번호 10-2021-0096375, July 22, 2021.

  4. 김성, 김진혁, 마상범, "다양한 비속도에서 수력학적 성능이 향상되도록 날개각 분포 설계가 적용된 축류펌프의 임펠러 설계 방법, 이에 의하여 설계된 임펠러 및 펌프(Design Method of Impeller for Axial Flow Pump with Blade Angle Distribution Design to Improve Hydraulic Performance at Various Specific Speeds, Impeller and Pump by the Method)," 특허출원번호 10-2021-0093596, July 16, 2021.

    1. 김성, 김진혁, 마상범, "자오면 형상 설계에 의한 설계사양 및 성능을 만족하는 축류펌프 임펠러 설계 방법, 이에 의하여 설계된 임펠러 및 펌프(Design Method of Impeller for Axial Flow Pump that Satisfies Design Specifications and Performance by Meridian Shape Design, Impeller and Pump by the Method)," 특허출원번호 10-2021-0093594, July 16, 2021.

  1. (한국생산기술연구원)김진혁, 마상범, 김성, 삼수딘 모하메드 무르시드, (지에스칼텍스 주식회사)이광희, 정창준, ((주)동양화공기계)윤지훈, "다단 원심 펌프(Multi-Stage Centrifugal Pump)," 특허출원번호 10-2021-0066296, May 24, 2021.

    1. 김성, 김진혁, 최영석, 마상범, "익형 형상을 이용한 펌프의 임펠러 설계 방법, 이에 의하여 설계된 임펠러 및 펌프(Design Method of Impeller for Pump Using Airfoil Shape, Impeller and Pump by the Method)," 특허출원번호 10-2021-0057771, May 4, 2021.

  1. (대한민국 해양경찰청)정병우, 윤건호, 이준영, (한국생산기술연구원)김진혁, 김성, 마상범, "휴대용 소형 배수펌프(Portable Small Drainage Pump)," 특허출원번호 10-2021-0014952, February 2, 2021.

  2. 김진혁, 마상범, 김성, 차동안, "머신러닝을 이용한 설계방법에 의해 설계된 마이크로 터빈 및 이의 설계방법(Micro Turbine Designed by Design Method Using Machine Learning and Its Design Method)," 특허출원번호 10-2020-0160947, November 26, 2020.

  3. 김진혁, 김정열, 김성, 마상범, 이대규, "반도체 테스트 챔버(Semiconductor Test Chamber)," 특허출원번호 10-2020-0136137, October 20, 2020.

  4. 김진혁, 김성, 마상범, "머신러닝을 이용한 오폐수용 투베인 펌프의 설계방법 및 이에 따라 설계된 오폐수용 투베인 펌프(Design Method of Two Vane Pump for Wastewater Using Machine Learning and Two Vane Pump Its Design Method)," 특허출원번호 10-2020-0112912, September 4, 2020.

  5. 김진혁, 마상범, 김성, 최영석, 차동안, "가이드 베인 및 러너를 포함하는 마이크로 수력 터빈 및 이의 설계 방법(Micro Hydro Turbine with Guide Vane and Runner and Design Method Thereof)," 특허출원번호 10-2020-0098568, August 6, 2020.

    1. 김진혁, 김성, 최영석, 이석우, 김태곤, 김효영, "분진 흡입성능 향상을 위한 라우팅 가공용 복합헤드의 유로 설계 방법, 이에 의하여 설계된 복합헤드용 드릴부 및 이를 포함하는 복합헤드(Method for Designing a Flow Path of Routing Composite Head with Improved Dust Suction Performance and a Drill for Composite Head Designed Thereby and the Composite Head Using the Drill)," 특허출원번호 10-2020-0087766, July 15, 2020.

    2. 김진혁, 마상범, 김성, 최영석, 차동안, "프로펠러형 마이크로 수차의 설계 방법 및 이에 의하여 설계된 프로펠러형 마이크로 수차(Method for Designing a Propeller Type Micro Aberration and a Propeller Type Micro Aberration Designed Thereby)," 특허출원번호 10-2020-0087762, July 15, 2020.

  1. 김진혁, 김성, 마상범, 최영석, "임펠러 및 벌류트 설계변수를 반영한 오폐수용 투베인 펌프의 설계방법 및 이에 따라 설계된 오폐수용 투베인 펌프(Design Method of Two Vane Pump for Wastewater Treatment and Two Vane Pump Designed Accordingly)," 특허출원번호 10-2020-0086761, July 14, 2020.

  2. 김진혁, 김성, 마상범, 최영석, "영향성 분석을 이용한 오폐수용 투베인 펌프의 임펠러 설계방법(Design Method of Two Vane Pump Impeller for Wastewater Treatment using Impact Analysis)," 특허출원번호 10-2020-0079804, June 30, 2020.

  3. 김진혁, 김성, 마상범, 최영석, "오폐수용 투베인 펌프의 임펠러 설계방법(Design Method of Two Vane Pump Impeller for Wastewater Treatment)," 특허출원번호 10-2020-0067580, June 4, 2020.

  4. 김진혁, 김성, 최영석, 김태곤, 김효영, 이석우, "복합헤드 분진 흡입 시스템의 흡입 성능 예측 방법(Method for Predicting Suction Performance of Composite Head Dust Suction System)," 특허출원번호 10-2020-0065422, May 29, 2020.

  5. 김진혁, 김성, 최영석, 김태곤, 김효영, 이석우, "분진 흡입 성능이 향상된 복합헤드용 드릴부의 설계 방법, 이에 의하여 설계된 복합헤드용 드릴부 및 이를 포함하는 복합헤드(Method for Designing a Drill for Composite Head with Improved Dust Suction Performance and the Drill for Composite Head Designed Thereby and the Composite Head Suing the Drill)," 특허출원번호 10-2020-0065418, May 29, 2020.

  6. 김진혁, 김성, 최영석, 김태곤, 김효영, 이석우, "압력손실을 최소화하여 흡입성능을 향상시킬 수 있는 복합헤드용 드릴부, 이를 포함하는 복합헤드 및 복합헤드용 드릴부의 설계 방법(Drill for Composite Head That Can Improve Suction Performance by Minimizing Pressure Loss and Composite Head Using the Drill and Design Method of the Drill)," 특허출원번호 10-2020-0065416, May 29, 2020.

  7. 김진혁, 최영석, 소나왓 아리한트, "회전자가 트위스트된 용적식 수차의 설계방법(Design Method of Positive Displacement Aberration with Twisted Rotor)," 특허출원번호 10-2020-0048556, April 22, 2020.

  8. 김진혁, 최영석, 양현모, 소나왓 아리한트, "유량 예측이 가능한 용적식 수차(Flow Predictable Positive Displacement Turbine)," 특허출원번호 10-2020-0048552, April 22, 2020.

  9. 이경용, 최영석, 김진혁, "고압 다단 재생형 유체기계(High Pressure Multi-Stage Regenerative Type Turbo-Machinery)," 특허출원번호 10-2019-0147827, November 18, 2019.

  10. 차동안, 김진혁, 김선창, "감압식 복합 건조 장치 및 이를 이용한 건조 방법(Depressurizing-Type Complex Drying Device and Drying Method using the Same)," 특허출원번호 10-2019-0098969, August 13, 2019.

    1. 김진혁, 차동안, 김선창, 삼수딘 모하메드 무르시드, "열풍 유동 제어 가능한 하이브리드 감압식 히트펌프 건조기 및 이를 이용한 피건조물의 건조 방법(Hybrid Depressurizing-Type Heat Pump Dryer Capable of Controling the Flow of Hot Air, and Drying Method of the Object to be Dried Using the Same)," 특허출원번호 10-2019-0088175, July 22, 2019.

  1. 김진혁, 최영석, 양현모, 소나왓 아리한트, 김승준, "용적식 수차 성능 시험 설비 및 이를 이용한 성능 시험 방법(Performance Test Equipment of Positive Displacement Turbine and Performance Test Method Using It)," 특허출원번호 10-2019-0077745, June 28, 2019.

  2. 김진혁, 최영석, 김승준, "프란시스 수차의 성능 예측 방법(Performance Prediction Method of Francis Hydro Turbine)," 특허출원번호 10-2019-0077085, June 28, 2019.

  3. 김진혁, 차동안, 김선창, "피건조물 상태 확인 가능한 하이브리드 감압식 히트펌프 건조기 및 이를 이용한 피건조물의 건조 방법(Hybrid Depressurizing-Type Heat Pump Dryer Capable of Checking the Condition of the Object to be Dried, and Drying Method of the Object to be Dried using the Same)," 특허출원번호 10-2019-0077085, June 27, 2019.

  4. 김진혁, 최영석, 김성, 양현모, 최복성, "목표 설계사양을 갖는 임펠러의 형상 설계 방법(Method of Designing Shape of Impeller with Target Design Specification)," 특허출원번호 10-2019-0075779, June 25, 2019.

  5. 김진혁, 최영석, 양현모, 소나왓 아리한트, 김승준, "압력 맥동 저감을 위한 용적식 수차(Positive Displacement Turbine for Pressure Pulsation Reduction)," 특허출원번호 10-2019-0062618, May 28, 2019.

  6. 김진혁, 차동안, 김선창, "하이브리드 감압식 히트펌프 건조기 및 이를 이용한 건조방법(Depressurizing-Type Heat Pump Dryer and Drying Method Thereof)," 특허출원번호 10-2019-0045478, April 18, 2019.

  7. 김진혁, 최영석, 김성, 양현모, "단일채널펌프 임펠러의 대면적 내부 유로 설계 방법(Design Method of Internal Flow Channel Cross Section of Single Channel Pump Impeller)," 특허출원번호 10-2019-0043701, April 15, 2019.

  8. 김진혁, 최영석, 양현모, 소나왓 아리한트, 김승준, "차압조절 및 유량적산 기능을 갖는 용적식 수차(Volumetric Water Wheel)," 특허출원번호 10-2019-0043709, April 15, 2019.

  9. 김진혁, 최영석, 이경용, 소나왓 아리한트, 김승준, "회전자가 트위스트 된 용적식 수차 장치(Volumetric Water Wheel with Twisted Rotor)," 특허출원번호 10-2018-0107226, September 7, 2018.

  10. 김진혁, 최영석, 이경용, 송왕기, "임펠러 재설계에 따라 출력 변경이 가능한 단일채널펌프의 설계방법(Design Method of Single Channel Pump That Can Change Output According to the Impeller Redesign)," 특허출원번호 10-2018-0056026, May 16, 2018.

  11. 김진혁, 최영석, 이경용, 송왕기, "임펠러 재설계에 따라 출력 변경이 가능한 단일채널펌프(Single Channel Pump That Can Change Output According to the Impeller Redesign)," 특허출원번호 10-2018-0056024, May 16, 2018.

  12. 김진혁, 최영석, 이경용, 송왕기, "출력 변경이 용이한 고효율 저유체 유발 진동 단일채널펌프의 설계방법(Design Method of Single Channel Pump for High Efficiency and Low Fluid Induced Vibration with Easy to Change Output)," 특허출원번호 10-2018-0050612, May 2, 2018.

  13. 김진혁, 최영석, 이경용, "오폐수 펌프의 예지보전을 위한 모니터링 시스템(Monitoring System for Predictive Maintenance of a Sewage Pump)," 특허출원번호 10-2018-0050698, May 2, 2018.

  14. 김진혁, 최영석, 이경용, 송왕기, "출력 변경이 용이한 고효율 저유체 유발 진동 단일채널펌프(Single Channel Pump for High Efficiency and Low Fluid Induced Vibration with Easy to Change Output)," 특허출원번호 10-2018-0042332, April 11, 2018.

  15. 최영석, 김성, 이경용, 김진혁, "콤팩트하고 단순화한 사류펌프의 디퓨저 설계 방법, 이에 의하여 설계된 디퓨저 및 이를 구비한 사류 펌프(Compact and Simplifying Design Method of Diffuser for Mixed Flow Pump, Diffuser Designed by the Method and Mixed Flow Pump Having the Same)," 특허출원번호 10-2017-0143814, October 31, 2017.

  16. 김진혁, 최영석, 이경용, 소나왓 아리한트, 김승준, "다기능 차압 발전 유닛을 구비하는 지역 난방 시스템(District Heating System including Multi-Function Differential Pressure Power Generation Unit)," 특허출원번호 10-2017-0126724, September 29, 2017.

  17. 김진혁, 최영석, 이경용, 송왕기, "고효율 저유체 유발 진동 단일채널펌프(Single Channel Pump for High Efficiency and Low Fluid Induced Vibration)," 특허출원번호 10-2017-0023656, February 22, 2017.

  18. 김진혁, 최영석, 이경용, 송왕기, "고효율 저유체 유발 진동 단일채널펌프의 설계방법(Design Method of Single Channel Pump for High Efficiency and Low Fluid Induced Vibration)," 특허출원번호 10-2017-0023650, February 2, 2017.

  19. 김진혁, 최영석, 이경용, "동적 진동 저감형 단일유로펌프 및 이의 설계방법(Dynamic Vibration Reduction Type Single Channel Pump and Its Design Method)," 특허출원번호 10-2017-0000245, January 2, 2017.

  20. 최영석, 이경용, 김진혁, 정욱희, 양현모, 최용, "시스템에 장착된 축류형 송풍기의 유량 및 압력 측정장치 및 그 측정방법(Apparatus for Measuring Flow Rate and Pressure of Axial Fan Installed in System Having the Same)," 특허출원번호 10-2016-0162944, December 1, 2016.

  21. 최영석, 이경용, 김진혁, 정욱희, 양현모, 최용, "시스템에 장착된 원심형 송풍기의 유량 및 압력 측정장치 및 그 측정방법(Apparatus for Measuring Flow Rate and Pressure of Centrifugal Fan Installed in System and Measuring Method Thereof)," 특허출원번호 10-2016-0160641, November 29, 2016.

  22. 김진혁, 최영석, 이경용, "진동 저감형 단일유로펌프 및 이의 설계방법(Vibration Reduction Type Single Channel Pump and Its Design Method)," 특허출원번호 10-2016-0151269, November 14, 2016.

  23. 김진혁, 최영석, 이경용, 조보민, "단일 유로 펌프 임펠러 및 이를 구비한 원심 펌프(Single Channel Pump Impeller and Centrifugal Pump having the Same)," 특허출원번호 10-2016-0115198, September 7, 2016.

  24. 최영석, 김성, 이경용, 김진혁, "효율 및 흡입성능을 동시에 최적화하는 원심 및 사류 펌프 임펠러 최적화 설계 방법, 이에 의하여 설계된 원심 및 사류 펌프 임펠러 및 원심 및 사류 펌프(Optimal Design Method of Impeller for Centrifugal and Mixed Flow Pump for Optimizing Efficiency and Suction Performance at the Same Time, Impeller of Centrifugal and Mixed Flow by the Method, Impeller of Centrifugal and Mixed Flow Pump Having the Same)," 특허출원번호 10-2016-0109458, August 26, 2016.

  25. 최영석, 김성, 이경용, 김진혁, "원심 및 사류 펌프 벌류트의 성능 향상을 위한 설계방법, 이에 의하여 설계된 원심 및 사류 펌프 벌류트, 이를 구비하는 원심 및 사류 펌프(Design Method of Volute for Centrifugal and Mixed Flow Pump for Improving Performance, Volute of Centrifugal and Mixed Flow Pump Designed by the Method and Centrifugal and Mixed Flow Pump Having the Same)," 특허출원번호 10-2016-0103761, August 16, 2016.

  26. 최영석, 김성, 이경용, 김진혁, "효율 및 양정을 동시에 최적화하는 임펠러 및 디퓨저의 최적화 설계 방법, 이에 의하여 설계된 임펠러 및 디퓨저, 이를 구비한 원심 및 사류 펌프(Optimal Design Method of Impeller and Diffuser, Impeller and Diffuser Designed by the Method and Centrifugal and Mixed Flow Pump Having the Same)," 특허출원번호 10-2016-0103739, August 16, 2016.

  27. 김진혁, 최영석, 김진우, 서준원, 이경용, "고효율 엇회전 펌프 수차, 이의 최적화 설계방법 및 이를 포함하는 자가 발전 시스템(A high-efficiency counter-rotating type pump-turbine and an optimal design method thereof and a self generating system having counter-rotating type pump-turbine)," 특허출원번호 10-2015-0151426, October 29, 2015.

  28. 김진혁, 최영석, 이경용, 조보민, "단일 유로 펌프 벌류트 및 이를 구비한 원심 펌프(Single Channel Pump Volute and Centrifugal Pump having the Same)," 특허출원번호 10-2015-0132532, September 18, 2015.

  29. 김진혁, 최영석, 이경용, 조보민, 김준형, "단일 유로 펌프 벌류트의 최적화 설계방법, 이에 의하여 설계된 단일 유로 펌프 벌류트 및 원심펌프(Optimal Design Method of Single Channel Pump Volute, Single Channel Pump Volute and Centrifugal Pump Designed by the Method)," 특허출원번호 10-2015-0132542, September 18, 2015.

  30. 김진혁, 최영석, 이경용, 조보민, 김준형, "단일 유로 펌프 임펠러의 고효율 최적화 설계방법 및 이에 의하여 설계된 고효율 단일 유로 펌프 임펠러(High Efficiency Optimal Design Method of Single Channel Pump Impeller and High Efficiency Single Channel Pump Impeller Designed by the Method)," 특허출원번호 10-2015-0132549, September 18, 2015.

  31. 최영석, 김성, 이경용, 김진혁, "원심 및 사류 펌프 임펠러 최적화 설계 방법, 이에 의하여 설계된 원심 및 사류 펌프 임펠러 및 원심 및 사류 펌프(Optimal Design Method of Impeller for Centrifugal and Mixed Flow Pump, Impeller of Centrifugal and Mixed Flow Pump and Centrifugal and Mixed Flow Pump by the Method)," 특허출원번호 10-2015-0107402, July 29, 2015.

  32. 김진혁, 최영석, 김준형, 조보민, 이경용, "단일 유로 펌프 임펠러의 최적화 설계방법, 이에 의하여 설계된 단일 유로 펌프 임펠러 및 원심 펌프(Optimal Design Method of Single Channel Pump Impeller, Single Channel Pump Impeller and Centrifugal Pump Designed by the Method)," 특허출원번호 10-2015-0043524, March 27, 2015.

  33. 이경용, 최영석, 김진혁, 정욱희, "부등피치 재생 블로워 및 이의 최적화 설계 방법(Uneven Pitch Regenerative Blower and an Optimal Design Method Thereof)," 특허출원번호 10-2014-0172727, December 4, 2014.

  34. 김진혁, 최영석, 김준형, 김성, 이힘찬, "역회전형 펌프 터빈의 최적화 설계 방법, 이에 의하여 설계된 역회전형 펌프 터빈 및 자가 발전 시스템(An Optimal Design Method of Counter-Rotating Type Pump-Turbine, A Counter-Rotating Pump-Turbine and Self Generating System Designed by the Method)," 특허출원번호 10-2014-0126840, September 23, 2014.

  35. 김진혁, 최영석, 김준형, "역회전형 펌프 터빈, 이를 포함하는 자가 발전 시스템 및 역회전형 펌프 터빈의 최적화 설계 방법(A Counter-Rotating Type Pump-Turbine and a Self Generating System having the Same and an Optimal Design Method of a Counter-Rotating Type Pump-Turbine)," 특허출원번호 10-2014-0103992, August 11, 2014.

  36. 김광용, 김진혁, 최광진, "축류압축기의 케이싱 그루브 최적설계방법 및 최적설계된 케이싱 그루브(Optimization Design Method for Casing Grooves of an Axial Compressor and the Optimized Casing Grooves)," 특허출원번호 10-2010-0075490, August 5, 2010.