Publications

Journal publications

A. Ortolani, G. Persico, J. Drofelnik, A. Jackson, M.S. Campobasso, Computational Fluid Dynamics Analysis of Floating Offshore Wind Turbines in Severe Pitching Conditions, ASME Journal of Engineering for Gas Turbine and Power, 2020. Accepted.

A. Morrall, S. Quayle, M.S. Campobasso, Turbulence modelling for RANS CFD analyses of multi-nozzle annular-jet pump swirling flows, International Journal of Heat and Fluid Flow, Vol. 85, 2020. DOI: 10.1016/j.ijheatfluidflow.2020.108652.

M.S. Campobasso, A. Cavazzini, E. Minisci, Rapid Estimate of Wind Turbine Energy Loss due to Blade Leading Edge Delamination Using Artificial Neural Networks, ASME Journal of Turbomachinery, Vol. 142, no. 7, 2020. DOI: 10.1115/1.4047186.

A.G. Sanvito, G.B.A. Persico, M.S. Campobasso, Assessing the Sensitivity of Stall-Regulated Wind Turbine Power to Blade Design Using High-Fidelity CFD, ASME Journal of Engineering for Gas Turbine and Power, Vol. 141, no. 10, 2019. DOI: 10.1115/1.4044731. Received 2019 Best Paper Award of the ASME Wind Energy Division.

A. Jackson, M.S. Campobasso, J. Drofelnik, Load balance and parallel I/O: optimising COSA for large simulation, Computers and Fluids, Vol. 173, 2018, pp. 206-215. DOI: 10.1016/j.compfluid.2018.03.007. Download Accepted Author Manuscript here.

J. Drofelnik, A. Da Ronch, M.S. Campobasso, Harmonic balance Navier-Stokes aerodynamic analysis of horizontal axis wind turbines in yawed wind, Wind Energy, Vol. 21, no. 7, 2018, pp. 515-530. DOI: 10.1002/we.2175. Download pre-peer reviewed article here.

M.S. Campobasso, M. Yan, A. Bonfiglioli, F. Gigante, L. Ferrari, F. Balduzzi, A. Bianchini, Low-speed preconditioning for strongly coupled integration of Reynolds-averaged Navier-Stokes equations and two-equation turbulence models, Aerospace Science and Technology, Vol. 77, 2018, pp. 286-298. DOI: 10.1016/j.ast.2018.03.015. Download Accepted Author Manuscript here.

F. Balduzzi, D. Marten, A. Bianchini, J. Drofelnik, L. Ferrari, M.S. Campobasso, G. Pechlivanoglou, C.N. Nayari, G. Ferrara, C.O. Paschereit, Three-dimensional Aerodynamic Analysis of a Darrieus Wind Turbine Blade Using Computational Fluid Dynamics and Lifting Line Theory, ASME Journal of Engineering for Gas Turbines and Power, Vol. 140, no. 2, 2018. DOI: 10.1115/1.4037750. Download Accepted Author Manuscript here.

F. Balduzzi, J. Drofelnik, A. Bianchini, G. Ferrara, L. Ferrari, M.S. Campobasso, Darrieus Wind Turbine Blade Unsteady Aerodynamics: a Three-Dimensional Navier-Stokes CFD Assessment, Energy, Vol. 128, 2017, pp. 550-563. DOI: 10.1016/j.energy.2017.04.017. Download Accepted Author Manuscript here.

J. Drofelnik and M.S. Campobasso, Comparative Turbulent Three-Dimensional Navier-Stokes Hydrodynamic Analysis and Performance Assessment of Oscillating Wings for Renewable Energy Applications, International Journal of Marine Energy, Vol. 16, 2016, pp. 100-115. DOI: 10.1016/j.ijome.2016.05.009. Download Accepted Author Manuscript here.

M.S. Campobasso, J. Drofelnik, F. Gigante, Comparative Assessment of the Harmonic Balance Navier-Stokes Technology for Horizontal and Vertical Axis Wind Turbine Aerodynamics, Computers and Fluids, Vol. 136, 2016, pp. 354-370. DOI: 10.1016/j.compfluid.2016.06.023. Download Accepted Author Manuscript here.

M. Caboni, M.S. Campobasso, E. Minisci, Wind Turbine Design Optimization under Environmental Uncertainty, ASME Journal of Engineering for Gas Turbines and Power, Vol. 138, no. 8, 2016. DOI:10.1115/1.4032665. Download Accepted Author Manuscript here.

M.S. Campobasso, E. Minisci, M. Caboni, Aerodynamic Design Optimization of Wind Turbine Rotors Under Geometric Uncertainty, Wind Energy, Vol. 19, no. 1, 2016, pp. 51-66. DOI: 10.1002/we.1820. Download Accepted Author Manuscript here.

M.S. Campobasso, A. Piskopakis, J. Drofelnik, A. Jackson, Turbulent Navier-Stokes Analysis of an Oscillating Wing in a Power Extraction Regime Using the Shear Stress Transport Turbulence Model, Computers and Fluids, Vol. 88, 2013, pp. 136-155. DOI: 10.1016/j.compfluid.2013.08.016. Download Accepted Author Manuscript here.

A. Da Ronch, A. McCraken, K.J. Badcock, M. Widhalm, M.S. Campobasso, Linear Frequency Domain and Harmonic Balance Predictions of Dynamic Derivatives, Journal of Aircraft, Vol. 50, no. 3, 2013, pp. 694-707. DOI: 10.2514/1.C031674.

M.S. Campobasso and J. Drofelnik, Compressible Navier-Stokes analysis of an oscillating wing in a power-extraction regime using efficient low-speed preconditioning, Computers and Fluids, Vol. 67, 2012, pp. 26-40. DOI: 10.1016/j.compfluid.2012.07.002. Download Accepted Author Manuscript here.

M.S. Campobasso and M.H. Baba-Ahmadi, Analysis of Unsteady Flows Past Horizontal Axis Wind Turbine Airfoils Based on Harmonic Balance Compressible Navier-Stokes Equations with Low-Speed Preconditioning, ASME Journal of Turbomachinery, Vol. 134, no. 6, 2012. DOI: 10.1115/1.4006293. Download Accepted Author Manuscript here.

A. Jackson and M.S. Campobasso, Shared-memory, Distributed-memory and Mixed-mode Parallelization of a CFD Simulation Code, Computer Science Research and Development, Vol. 26, No. 3-4, 2011, pp. 187-195. DOI: 10.1007/s00450011-0162-4.

M. Padulo, M.S. Campobasso, M.D. Guenov, A Novel Uncertainty Propagation Method for Robust Aerodynamic Design, AIAA Journal, Vol. 49, no. 3, 2011, pp. 530-543. DOI: 10.2514/1.J050448.

M.S. Campobasso, M.H. Baba-Ahmadi, Ad-hoc Boundary Conditions for CFD Analyses of Turbomachinery Problems with Strong Flow Gradients at Farfield Boundaries, ASME Journal of Turbomachinery, Vol. 133, no. 4, 2011. DOI: 10.1115/1.4002985.

M.S. Campobasso, A. Zanon, E. Minisci, A. Bonfiglioli, Wake-Tracking and Turbulence Modelling in Computational Aerodynamics of Wind Turbine Airfoils, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol. 223, no. 8, 2009, pp. 939-951. DOI: 10.1243/0957509JPE778.

M.S. Campobasso and M.B. Giles, Stabilizing Linear Harmonic Flow Solvers for Turbomachinery Aeroelasticity with Complex Iterative Algorithms, AIAA Journal, Vol. 44, no. 5, May 2006, pp. 1048-1059. DOI: 10.2514/1.17069.

M.C. Duta, M.S. Campobasso, M.B. Giles, L.B. Lapworth, Adjoint Harmonic Sensitivities for Forced Response Minimization, ASME Journal of Engineering for Gas Turbines and Power, Vol. 128, no. 1, January 2006, pp. 183-189. DOI: 10.1115/1.2031227.

M.S. Campobasso and M.B. Giles, Stabilization of a Linear Flow Solver for Turbomachinery Aeroelasticity Using Recursive Projection Method, AIAA Journal, Vol. 42, no. 9, September 2004, pp. 1765-1774. DOI: 10.2514/1.1225.

M.S. Campobasso, M.C. Duta, M.B. Giles, Adjoint Calculation of Sensitivities of Turbomachinery Objective Functions, AIAA Journal of Propulsion and Power, Vol. 19, no. 4, July-August 2003, pp. 693-703. DOI: 10.2514/2.6159.

M.S. Campobasso and M.B. Giles, Effects of Flow Instabilities on the Linear Analysis of Turbomachinery Aeroelasticity, AIAA Journal of Propulsion and Power, Vol. 19, no. 2, March-April 2003, pp. 250-259. DOI: 10.2514/2.6106.

M.C. Duta, M.B. Giles, M.S. Campobasso, The Harmonic Adjoint Approach to Unsteady Turbomachinery Design, International Journal for Numerical Methods in Fluids, Vol. 40, 2002, pp. 323-332. DOI: 10.1002/fld.289.

Book publications

A. Cavazzini, M.S. Campobasso. M. Marconcini, R. Pacciani, A. Arnone, Harmonic balance Navier-Stokes analysis of tidal stream turbine wave loads, Recent Advances in CFD for Wind and​ Tidal Offshore Turbines, Springer Tracts in Mechanical Engineering, E. Ferrer and A. Montlaur editors, Springer International Publishing, 2019. Chapter DOI: 10.1007/978-3-030-11887-7_4. Book 10.1007/978-3-030-11887-7.

M. Caboni, E. Minisci, M.S. Campobasso, Robust Aerodynamic Design Optimization of Horizontal Axis Wind Turbines, Advances in Evolutionary and Deterministic Methods for Design, Optimization and Control in Engineering and Sciences, Computational Methods in Applied Sciences, D. Greiner, B. Galván, J. Periaux, N. Gauger, K. Giannakoglou, G. Winter editors, Springer Verlag, 2014, Vol. 36. Chapter DOI: 10.1007/978-3-319-11541-2_14. Book DOI: 10.1007/978-3-319-11541-2.

A. Bonfiglioli, M.S. Campobasso, B. Carpentieri and M. Bollhoefer, A parallel 3D unstructured implicit RANS solver for compressible and incompressible CFD simulations, Parallel Processing and Applied Mathematics 2011, R. Wyrzykowski, J. Dongarra, K. Karczewski, J. Wasniewski editors, Lecture Notes in Computer Science, Springer Verlag, 2012, Vol. 7203, pp. 313-322. Chapter DOI: 10.1007/978-3-642-31500-8_32. Book DOI: 10.1007/978-3-642-31500-8.

M.S. Campobasso and M.B. Giles, Stabilization of a Linearized Navier-Stokes solver for Turbomachinery Aeroelasticity, Computational Fluid Dynamics 2002, S. Armfield, P. Morgan and K. Srinivasan editors, Springer Verlag, Berlin, Germany, 2003, pp. 343-348. Chapter DOI: 10.1007/978-3-642-59334-5_50. Book DOI: 10.1007/978-3-642-59334-5.

M.S. Campobasso and M.B. Giles, Analysis of the Effect of Mistuning on Turbomachinery Aeroelasticity, Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity in Turbomachines, P. Ferrand and S. Aubert editors, Presses Universitaires de Grenoble, Grenoble, France, 2001, pp. 885-896. ISBN: 2 7061 1052 X.

Conference papers

A. Ortolani, G. Persico, J. Drofelnik, A. Jackson, M.S. Campobasso, Cross-comparative analysis of loads and power of pitching floating offshore wind turbine rotors using frequency-domain Navier-Stokes CFD and blade element momentum theory, Journal of Physics: Conference Series, Vol. 1618, no.5, ref. 052016, September 2020. DOI: 10.1088/1742-6596/1618/5/052016. TORQUE Conference, virtual event, online, 28th September - 2nd October 2020.

A. Castorrini, L. Cappugi, A. Bonfiglioli, M.S. Campobasso, Assessing wind turbine energy losses due to blade leading edge erosion cavities with parametric CAD and 3D CFD, Journal of Physics: Conference Series, Vol. 1618, no.5, ref. 052015, September 2020. DOI: 10.1088/1742-6596/1618/5/052015. TORQUE Conference, virtual event, online, 28th September - 2nd October 2020.

A. Ortolani, G. Persico, J. Drofelnik, A. Jackson, M.S. Campobasso, High-Fidelity Calculation of Floating Offshore Wind Turbines under Pitching Motion, paper GT2020-15552, ASME Turbo Expo Technical Conference, virtual event, online, 21st-25th September 2020.

A. Cavazzini, E. Minisci, M.S. Campobasso, Machine Learning-Aided Assessment of Wind Turbine Energy Losses due to Blade Leading Edge Damage, paper IOWTC2019-7578, ASME 2019 2nd International Offshore Wind Technical Conference (IOWTC 2019), 3rd-6th November 2019, St Julian's, Malta. DOI: 10.1115/IOWTC2019-7578

A. Morrall, M.S. Campobasso, S. Quayle, Navier-Stokes CFD assessment of two multi-nozzle annular jet pumps with a design optimisation study, International Conference of Heat Transfer, Fluid Mechanics and Thermodynamics, 22nd-24th July 2019, Wicklow, Ireland.

A.G. Sanvito, G.B.A. Persico, M.S. Campobasso, Assessing the Sensitivity of Stall-Regulated Wind Turbine Power to Blade Design Using High-Fidelity CFD, ASME paper GT2019-90956, ASME Turbo Expo Technical Congress, 17th-21st June 2019, Phoenix, Arizona.

M.S. Campobasso, A. Sanvito, J. Drofelnik, A. Jackson, Y. Zhou, Q. Xiao, A. Croce, Compressible Navier-Stokes Analysis of Floating Wind Turbine Rotor Aerodynamics, paper IOWTC2018-1059, ASME 2018 1st International Offshore Wind Technical Conference (IOWTC 2018), 4th-7th November 2018, San Francisco, California, USA. DOI: 10.1115/IOWTC2018-1059

J. Drofelnik, A. Da Ronch, M.S. Campobasso, Feasibility of the Nabier-Stokes Harmonic Balance Method for Modelling Aircraft Unsteady Aerodynamics, Proceedings of the 31st Conference of the International Council of the Aeronautical Sciences (ICAS), 9th-14th September 2018, Belo Horizonte, Brazil. Download Accepted Author Manuscript here.

A. Morrall, M.S. Campobasso, S. Quayle, Numerical and Experimental Investigation of a Vortical Flow-Inducing Jet Pump, Conference on Modelling Fluid Flows 2018, 4th-7th September 2018, Budapest, Hungary.

G. Amato, S. Doyle, S. Petley, M.S. Campobasso, I.A. Milne, G.A. Aggidis, Navier-Stokes CFD Analysis of a Tidal Turbine Rotor in Steady and Planar Oscillatory Flow, European Wave and Tidal Energy Conference, 27th-2nd September 2017, Cork, Ireland. Download Accepted Author Manuscript here.

F. Balduzzi, A. Bianchini, G. Ferrara, D. Marten, G. Pechlivanoglou, C.N. Nayari, C.O. Paschereit, J. Drofelnik, M.S. Campobasso, L. Ferrari, Three-dimensional Aerodynamic Analysis of a Darrieus Wind Turbine Blade Using Computational Fluid Dynamics and Lifting Line Theory, paper GT2017-64701, ASME/IGTI Turbo Expo 2017 Technical Conference, 26th-30th June 2017, Charlotte, North Carolina, USA. DOI: 10.1115/GT2017-64701.

M.S. Campobasso, Robust Design Optimization of Wind Turbine Rotors, Conference on Modelling Fluid Flows 2015, invited paper, 1st-4th September 2015, Budapest, Hungary. Download paper (435 KB).

J. Drofelnik and M.S. Campobasso, Three-Dimensional Turbulent Navier-Stokes Hydrodynamic Analysis and Performance Assessment of Oscillating Wings for Power Generation, Conference on Modelling Fluid Flows 2015, 1st-4th September 2015, Budapest, Hungary.

F. Balduzzi, A. Bianchini, F. Gigante, G. Ferrara, M.S. Campobasso, L. Ferrari, Parametric and Comparative Assessment of Navier-Stokes CFD Technologies for Darrieus wind turbines Performance Analysis, paper GT2015-42663, ASME/IGTI Turbo Expo 2015 Technical Conference, 15th-19th June 2015, Montreal, Canada. DOI: 10.1115/GT2015-42663.

M. Caboni, M.S. Campobasso, E.Minisci, Wind Turbine Design Optimization under Environmental Uncertainty, paper GT2015-42674, ASME/IGTI Turbo Expo 2015 Technical Conference, 15th-19th June 2015, Montreal, Canada. DOI: 10.1115/GT2015-42674.

M.S. Campobasso, F. Gigante, J. Drofelnik, Turbulent Unsteady Flow Analysis of Horizontal Axis Wind Turbine Airfoil Aerodynamics Based on the Harmonic Balance Reynolds-Averaged Navier-Stokes Equations, ASME paper GT2014-25559, presented at the ASME/IGTI Turbo Expo 2014 Technical Conference, 16th-20th June 2014, Duesseldorf, Germany. DOI:10.1115/GT2014-25559.

M.S. Campobasso, M. Yan, J. Drofelnik, A. Piskopakis, M. Caboni, Compressible Reynolds-Averaged Navier-Stokes Analysis of Wind Turbine Turbulent Flows Using a Fully Coupled Low-speed Preconditioned Multigrid Solver, ASME paper GT2014-25562, presented at the ASME/IGTI Turbo Expo 2014 Technical Conference, 16th-20th June 2014, Duesseldorf, Germany. DOI:10.1115/GT2014-25562.

A. Jackson and M.S. Campobasso, Optimised hybrid parallelisation of a CFD code on many-core architectures, presented at the 15th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, 23rd-26th September 2013, Timisoara, Romania. Published by IEEE: ISBN: 978-1-4799-3035-7. DOI: 10.1109/SYNASC.2013.70.

M.S. Campobasso, A. Piskopakis, M. Yan, Analysis of an Oscillating Wing in a Power-Extraction Regime Based on the Compressible Reynolds-Averaged Navier-Stokes Equations and the K −ω SST Turbulence Model, ASME paper GT2013-94531, presented at the ASME/IGTI Turbo Expo 2013 Technical Conference, 3rd-7th June 2013, San Antonio, Texas, USA. DOI:10.1115/GT2013-94531.

M.S. Campobasso and J. Drofelnik, Analysis of an Oscillating Airfoil in a Power-Extraction Regime based on the Compressible Navier-Stokes Equations with Low-Speed Preconditioning, ASME paper GT2012-68265, presented at the ASME/IGTI Turbo Expo 2012 Technical Conference, 11th-15th June 2012, Copenhagen, Denmark. DOI:10.1115/GT2012-68265.

E. Minisci, M.S. Campobasso and M. Vasile, Robust aerodynamic design of variable-speed wind turbine rotors, ASME paper GT2012-69223, presented at the ASME/IGTI Turbo Expo 2012 Technical Conference, 11th-15th June 2012, Copenhagen, Denmark. DOI:10.1115/GT2012-69223.

E. Minisci, M.S. Campobasso, M. Dell’Antonio, A. Montecucco, M. Vasile, Multi-disciplinary robust design of variable-speed wind turbines, presented at EUROGEN 2011, International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems, CIRA, Italian Aerospace Research Center, 14th-18th September 2011, Capua, Italy. In ’Deterministic Methods for Design, Optimization and Control’, G. Poloni, D. Quagliarella, J. Periaux, N. Gauger, K. Giannakoglou editors.

A. Bonfiglioli, M.S. Campobasso, B. Carpentieri and M. Bollhoefer, A parallel 3D unstructured implicit RANS solver for compressible and incompressible CFD simulations, presented at the 9th International Conference on Parallel Processing and Applied Mathematics, 11th-14st September 2011, Torum, Poland.

A. Jackson and M.S. Campobasso, Shared-memory, Distributed-memory and Mixed-mode Parallelization of a CFD Simulation Code, presented at the International Supercomputing Conference 2011, 19th-23rd June 2011, Hamburg, Germany.

M.S. Campobasso and M.H. Baba-Ahmadi, Analysis of Unsteady Flows Past Horizonatal Axis Wind Turbine Airfoils Based on Harmonic Balance Compressible Navier-Stokes Equations with Low-Speed Preconditioning, ASME paper GT2011-45303, presented at the ASME/IGTI Turbo Expo 2011 Technical Conference, 6th-10th June 2011, Vancouver, Canada. DOI: 10.1115/GT2011-45303.

A. Jackson, M.S. Campobasso, M.H. Baba-Ahmadi, On the Parallelization of a Harmonic Balance Compressible Navier-Stokes Solver for Wind Turbine Aerodynamics, ASME paper GT2011-45306, presented at the ASME/IGTI Turbo Expo 2011 Technical Conference, 6th-10th June 2011, Vancouver, Canada. DOI:10.1115/GT2011-45306.

M.S. Campobasso and M. Botti, Approcci di calcolo efficienti per la progettazione di rotori eolici, Annual Review 2011 of the Consorzio interuniversitario per le Applicazioni di Supercalcolo per Universita’ e Ricerca’ (CASPUR).

A. Da Ronch, M. Choreyshi, K.J. Badcock, S. Goertz, M. Widhalm, R.P. Dwight, M.S. Campobasso, Linear Frequency Domain and Harmonic Balance Predictions of Dynamic Derivatives, AIAA paper 2010-4699, presented at the 28th AIAA Applied Aerodynamics Conference, 28th June - 1st July 2010, Chicago, Illinois, USA.

M.S. Campobasso, M.H. Baba-Ahmadi, G. McLelland, Ad-hoc Boundary Conditions for CFD Analyses of Turbomachinery Problems with Strong Flow Gradients at Farfield Boundaries, ASME paper GT2010-22176, presented at the ASME/IGTI Turbo Expo 2010 Technical Conference, 14th-18th June 2010, Glasgow, UK. Nominated for the Best paper award of the ASME/IGTI Turbo Expo 2010. DOI: 10.1115/GT2010-22176.

M.S. Campobasso, A. Bonfiglioli, M. Baba-Ahmadi, Development of Efficient and Accurate CFD Technologies for Wind Turbine Unsteady Aerodynamics, Proceedings of the Conference on Modelling Fluid Flow (CMFF 2009), 14th International Conference on Fluid Flow Technologies, 9th-12th September 2009, J. Vad editor, Vol. 2, pp. 879-886, presented at the Budapest University of Technology and Economics, Budapest, Hungary. ISBN: 978-963-420-986-7.

A. Bonfiglioli. M.S. Campobasso, B. Carpentieri, Parallel Unstructured ThreeDimensional Turbulent Flow Analyses using Efficiently Preconditioned Newton-Krylov solver, AIAA paper 2009-4137, presented at the 19th AIAA Computational Fluid Dynamics Conference, 22nd-25th June 2009, San Antonio, Texas, USA.

M.S. Campobasso, A. Zanon, M. Foerster, F. Fraysse, A. Bonfiglioli, CFD modelling of wind turbine airfoil aerodynamics, presented at the 63th National Conference of Associazione Termotecnica Italiana (ATI), 23rd-26th September 2008, Palermo, Italy.

M. Padulo, M.S. Campobasso and M. Guenov, Derivative-free uncertainty propagation methods for airfoil design, presented at the Euromech colloquium Efficient Methods for Robust Design and Optimization, Queen Mary London University, 10th-12th September 2007, London, UK.

M. Padulo, M.S. Campobasso and M. Guenov, Comparative analysis of uncertainty propagation methods for robust engineering design, ICED paper DS42-P-158, presented at the International Conference on Engineering Design, Design for Society, 28h-31st August 2007, Paris, France. ISBN: 1-904670-02-4.

A. Bonfiglioli and M.S. Campobasso, Computing Three-Dimensional Turbomachinery Flows with an Implicit Fluctuation Splitting Scheme, Proceedings of the Conference on Modelling Fluid Flow (CMFF 2006), 13th International Conference on Fluid Flow Technologies, 6th-9th September 2006, T. Lajos and J. Vad editors, Vol. 2, pp. 996-1003, presented at the Budapest University of Technology and Economics, Budapest, Hungary. ISBN: 963 06 0382 9.

M.S. Campobasso and M.B. Giles, Computing Linear Harmonic Unsteady Flows in Turbomachines with Complex Iterative Solvers, AIAA paper 20054705, presented at the 17th AIAA Computational Fluid Dynamics Conference, 6th-9th June 2005, Toronto, Canada.

M.C. Duta, M.S. Campobasso, M.B. Giles, L.B. Lapworth, Adjoint Harmonic Sensitivities for Forced Response Minimization, ASME paper GT-2003-38904, presented at the ASME-IGTI TURBO EXPO 2003 Technical Conference, 16th-19th June 2003, Atlanta, Georgia, USA. DOI: 10.1115/GT2003-38904.

M.S. Campobasso and M.B. Giles, Effects of Flow Instabilities on the Linear Analysis of Turbomachinery Aeroelasticity, AIAA paper 2002-4085, presented at the 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 7th-10th July 2002, Indianapolis, Indiana, USA.

M.S. Campobasso, M.C. Duta, M.B. Giles, Adjoint Methods for Turbomachinery Design, ISABE paper 2001-1055, presented at the 15th Conference of the International Society for Air-breathing Engines (ISABE), September 2001, Bangalore, India.

M.C. Duta, M.B. Giles, M.S. Campobasso, The Harmonic Adjoint Approach to Unsteady Turbomachinery Design, presented at the ICFD Conference on Numerical Methods for Fluid Dynamics, 26th-29th March 2001, Oxford, United Kingdom.

M.S. Campobasso, A. Mattheiss, U. Wenger, A. Arnone, P. Boncinelli, Complementary Use of CFD and Experimental Measurements to Assess the Impact of Shrouded and Cantilevered Stators in Axial Compressors, ASME paper 99-GT-208, presented at the ASME/IGTI Turbo Expo 1999 Technical Conference, June 1999, Indianapolis, Indiana, USA.