CH01 AND CH02 Construction Details
CH01 = TR6 - TR250
CH02 = TR4A-IRS
All frame rails except for the swing arm support rails are 3x3 11ga, (.119 inch wall) cold rolled welded steel tubing. Swing arm rails are 2x3 11GA tubing.
All tower assemblies are 10ga. (.131 thick) cold rolled steel plate.
Engine mounts, and transmission mounts are 10ga. cold rolled steel. Steering and radiator body mounts are 12 GA. (.101 inch thick)
T-Shirts/ mid frame supports are 14ga. (.078 inch thick) cold rolled steel plate.
Body mount brackets are 12ga. (.101 inch thick) cold rolled steel plate.
Rear trunk support cross member is 1.25X1.25 11ga. cold rolled welded steel tube.
Front lower wishbone mounts are 2X2 11ga. cold rolled welded steel tube.
CH03 Construction Details
CH03 = TR2-TR4All outside frame rails are 11ga. 3X3 inch steel box (.119 wall thickness) cold rolled welded steel tubing
The x-box rails are 11ga. 1.5 X 3 inch C-channel. The x-box center is 12ga. (.100 inch thick) steel plate.
The all body mounting brackets are 12ga. steel
The lever shock mounts, front towers and and shackle supports are 10ga. steel
All cross tubing is 1.25 X 1.25 11ga. steel tubing
Brake and fuel line connection points are 14ga. (.090 thick)
Steering rack mounts are 10ga. steel
Lever Shock Mount
Steering Rack Mount
Front Shock Towers
Front Right Tower
Rear Spring Shackle
Front Spring Mount