RIVERSIDE LAWN EQUIPMENT REPAIR AND MAINTENANCE

Thank you in advanced for viewing my web site.  Call me for a free five minute consultation so we can analise the cost of servicing your equipment.  Sometimes it's not a good value to repair or service equipment if the cost of doing so is more than the value of the equipment.

I will need to know if you bought your equipment new or used and how long you owned the equipment.  When you call let me know when it was last running and what are the symptoms of it's non operating status. Please have the make, model.  I would also appreciate a picture or two of the equipment you can send it to my email detailed101@gmail.com or text it to my phone number 909-660-3476.

If you have equipment that is not working or needs a tune up I have the tools and skills to get your equipment up and running.  I only work on equipment that provides you with a safe and positive investment.  I've always offered free advice if you decide to repair or maintenance your equipment yourself.  With over 10 years of experience my services have been proven so call me at 909-660-3476.  We only except cash.

My services can be grouped into two categories regarding your residential or commercial equipment.

 1) non operational equipment needing consultation prior to repair.                 

 2) preventive maintenance or tune up.                                                                                                                                           

The danger of mower engine speed

Most modern mowers are of the rotary type. Rotary mower engines are all made to spin at 3,600 revolutions per minute when not under load. During cutting, the rpm drops to between 2800 and 3300. There is a simple wire-based device for measuring rpm on a running mower, which all mower specialists would own.The other speed linked with your question could be that concerning the velocity of the blade tip as it revolves. As the center of the blade is spinning at 3600 rpm, an 18 inch blade tip will travel through the air at one speed a 21 inch at a faster speed and so on. Rotary mower blade bars are made up to a max of 24 inches.st

Lawnmower Accidents Cause Thousands of Foot Injuries each year.

Your lawn could become a "toe-away" zone if you’re not careful when operating rotary-blade lawn mowers.

The U.S. Consumer Products Safety Commission estimates more than 37,000 Americans suffer a power mower-related injury each year.

"We still see too many foot injuries from power lawnmowers," says foot and ankle surgeon James Thomas, DPM, FACFAS. "The blades whirl at 3,000 revolutions per minute and produce three times the kinetic energy of a .357 handgun. Yet we see patients who have been hurt while operating a mower barefoot! Foot injuries range from dirty, infection-prone lacerations to severed tendons to amputated toes."

If a mower accident occurs—even just a minor injury—Thomas says immediate treatment is necessary to flush the wound thoroughly and apply antibiotics to prevent infection. Superficial wounds can be treated on an outpatient basis, but more serious injuries usually require surgical intervention to repair tendon damage, deep clean the wound and suture it. Tendons severed in lawnmower accidents generally can be re-attached surgically unless toes have been amputated.

Thomas says children under the age of 14 and adults over age 44 are more likely to be injured from mowers than others. He advises anyone who operates a power mower to take a few simple precautions:

Treat Your Injury Right Away

If you have suffered any sort of foot or ankle lawnmower injury, consult a foot and ankle surgeon right away.

I will work on some lawn tractors on a case by case basis and depending on how far you are from Riverside .  I charge by the mile for pick up and drop off on equipment typically $ 1.00 per mile, not including a $ 150.00 trailer rental fee both ways included.  Most lawn mower shops are really busy this summer as usual and will take close to a month to repair.  They will charge a deposit and not usually work on your equipment nor repair it for a few weeks.  

Please understand large business can not offer the attention a single mechanic can working solely on your equipment.  I don't markup any parts or charge for looking up the part numbers and usually no shipping fees.  Most of the lawn tractors I work on cost my clients around $ 300.00 for repair not including parts and the return time is 7 usually working days.  Maintenance is usually another $ 300.00 not including parts.