Carrying Capacity

These carrying capacity rules determine how much a character's equipment slows him down. Encumbrance comes in two parts: encumbrance by armor and encumbrance by total weight.

Encumbrance by Armor: A character's armor determines his maximum Dexterity bonus to AC, armor check penalty, speed, and running speed. Unless your character is weak or carrying a lot of gear, that's all you need to know; the extra gear your character carries won't slow him down any more than the armor already does.

If your character is weak or carrying a lot of gear, however, then you'll need to calculate encumbrance by weight. Doing so is most important when your character is trying to carry some heavy object.

Encumbrance by Weight: If you want to determine whether your character's gear is heavy enough to slow him down more than his armor already does, total the weight of all the character's items, including armor, weapons, and gear. Compare this total to the character's Strength on Table: Carrying Capacity. Depending on the character's carrying capacity, he or she may be carrying a light, medium, or heavy load. Like armor, a character's load affects his maximum Dexterity bonus to AC, carries a check penalty (which works like an armor check penalty), reduces the character's speed, and affects how fast the character can run, as shown on Table: Encumbrance Effects. A medium or heavy load counts as medium or heavy armor for the purpose of abilities or skills that are restricted by armor. Carrying a light load does not encumber a character.

If your character is wearing armor, use the worse figure (from armor or from load) for each category. Do not stack the penalties.

Lifting and Dragging: A character can lift as much as his maximum load over his head. A character's maximum load is the highest amount of weight listed for a character's Strength in the heavy load column of Table: Carrying Capacity.

A character can lift as much as double his maximum load off the ground, but he or she can only stagger around with it. While overloaded in this way, the character loses any Dexterity bonus to AC and can move only 5 feet per round (as a full-round action).

A character can generally push or drag along the ground as much as five times his maximum load. Favorable conditions can double these numbers, and bad circumstances can reduce them by half or more.

Bigger and Smaller Creatures: The figures on Table: Carrying Capacity are for Medium bipedal creatures. A larger bipedal creature can carry more weight depending on its size category, as follows: Large ×2, Huge ×4, Gargantuan ×8, Colossal ×16. A smaller creature can carry less weight depending on its size category, as follows: Small ×3/4, Tiny ×1/2, Diminutive ×1/4, Fine ×1/8.

Quadrupeds can carry heavier loads than bipeds can. Multiply the values corresponding to the creature's Strength score from Table: Carrying Capacity by the appropriate modifier, as follows: Fine ×1/4, Diminutive ×1/2, Tiny ×3/4, Small ×1, Medium ×1-1/2, Large ×3, Huge ×6, Gargantuan ×12, Colossal ×24.

Tremendous Strength: For Strength scores not shown on Table: Carrying Capacity, find the Strength score between 20 and 29 that has the same number in the “ones” digit as the creature's Strength score does and multiply the numbers in that row by 4 for every 10 points the creature's Strength is above the score for that row.

Armor and Encumbrance for Other Base Speeds

Table: Armor and Encumbrance for Other Base Speeds provides reduced speed figures for all base speeds from 5 feet to 120 feet (in 5-foot increments).

Movement

There are three movement scales, as follows:

• Tactical, for combat, measured in feet (or 5-foot squares) per round.
• Local, for exploring an area, measured in feet per minute.
• Overland, for getting from place to place, measured in miles per hour or miles per day.

Modes of Movement

While moving at the different movement scales, creatures generally walk, hustle, or run.

1. Walk: A walk represents unhurried but purposeful movement (3 miles per hour for an unencumbered adult human).
2. Hustle: A hustle is a jog (about 6 miles per hour for an unencumbered human). A character moving his speed twice in a single round, or moving that speed in the same round that he or she performs a standard action or another move action, is hustling when he or she moves.
3. Run:
• Run (x3) - Moving three times speed is a running pace for a character in heavy armor (about 7 miles per hour for a human in full plate).
• Run (x4) - Moving four times speed is a running pace for a character in light, medium, or no armor ( about 12 miles per hour for an unencumbered human, or 9 miles per hour for a human in chainmail) See Table: Movement and Distance for details.

Tactical Movement

Tactical movement is used for combat. Characters generally don't walk during combat, for obvious reasons—they hustle or run instead. A character who moves his speed and takes some action is hustling for about half the round and doing something else the other half.

Local Movement

Characters exploring an area use local movement, measured in feet per minute.

Overland Movement

Characters covering long distances cross-country use overland movement. Overland movement is measured in miles per hour or miles per day. A day represents 8 hours of actual travel time. For rowed watercraft, a day represents 10 hours of rowing. For a sailing ship, it represents 24 hours.

See Table: Mounts and Vehicles for mounted speeds and speeds for vehicles pulled by draft animals.

Waterborne Movement: See Table: Mounts and Vehicles: Mounts and Vehicles for speeds for water vehicles.

Evasion and Pursuit

In round-by-round movement, when simply counting off squares, it's impossible for a slow character to get away from a determined fast character without mitigating circumstances. Likewise, it's no problem for a fast character to get away from a slower one.

When the speeds of the two concerned characters are equal, there's a simple way to resolve a chase: If one creature is pursuing another, both are moving at the same speed, and the chase continues for at least a few rounds, have them make opposed Dexterity checks to see who is the faster over those rounds. If the creature being chased wins, it escapes. If the pursuer wins, it catches the fleeing creature.

Sometimes a chase occurs overland and could last all day, with the two sides only occasionally getting glimpses of each other at a distance. In the case of a long chase, an opposed Constitution check made by all parties determines which can keep pace the longest. If the creature being chased rolls the highest, it gets away. If not, the chaser runs down its prey, outlasting it with stamina.

Exploration

Few rules are as vital to the success of adventurers than those pertaining to vision, lighting, and how to break things. Rules for each of these are explained below.

Vision and Light

Dwarves and half-orcs have darkvision, but the other races presented in Races need light to see by. See Table: Light Sources and Illumination for the radius that a light source illuminates and how long it lasts. The increased entry indicates an area outside the lit radius in which the light level is increased by one step (from darkness to dim light, for example).

Additional illumination level info from PPC:BoS.

Bright Light

In an area of bright light, all characters can see clearly. Some creatures, such as those with light sensitivity and light blindness, take penalties while in areas of bright light. A creature can't use Stealth in an area of bright light unless it is invisible or has cover. Areas of bright light include outside in direct sunshine and inside the area of a daylight spell.

Bright light is created by direct sunlight, as well as by spells such as daylight.

Color and detail are easily determined by most creatures in bright light, though shiny or reflective surfaces can be difficult to look at.

Creatures with light blindness are blinded when exposed to bright light, and those with light sensitivity are dazzled. It is impossible for characters in bright light to attempt Stealth checks without cover or invisibility.

Normal Light

Normal light functions just like bright light, but characters with light sensitivity and light blindness do not take penalties. Areas of normal light include underneath a forest canopy during the day, within 20 feet of a torch, and inside the area of a light spell.

Areas of normal light might include a glade under a forest canopy during midday, the interior of a room illuminated by indirect sunlight, and the space within 20 feet of a torch or an object affected by the light spell. While colors and fine details may not be as vivid in normal light, characters can still see easily without special forms of vision.

Normal light does not impact characters with light blindness or light sensitivity.

Dim Light

In an area of dim light, a character can see somewhat. Creatures within this area have concealment (20% miss chance in combat) from those without darkvision or the ability to see in darkness. A creature within an area of dim light can make a Stealth check to conceal itself. Areas of dim light include outside at night with a moon in the sky, bright starlight, and the area between 20 and 40 feet from a torch.

Areas of dim light include the outdoors on a moonlit night or the light of a candle in the absence of any other light source. Most sources of normal light cast a radius of dim light out to double the radius of the normal light. In dim light, creatures have concealment from those without some ability to see in darkness and can attempt Stealth checks in order to hide themselves.

Darkness

In the absence of light, darkness reigns supreme.

Some areas of darkness include unlit chambers of a dungeon, most caverns, and the outdoors on a cloudy, moonless night. Without darkvision or other ability to see in the dark, creatures in darkness are effectively blind. It is impossible to determine the color of an object in total darkness, even with darkvision. Creatures with darkvision see the unlit world only in shades of gray.

In areas of darkness, creatures without darkvision are effectively blinded. In addition to the obvious effects, a blinded creature has a 50% miss chance in combat (all opponents have total concealment), loses any Dexterity bonus to AC, takes a –2 penalty to AC, and takes a –4 penalty on Perception checks that rely on sight and most Strength- and Dexterity-based skill checks. Areas of darkness include an unlit dungeon chamber, most caverns, and outside on a cloudy, moonless night.

Characters with low-light vision (elves, gnomes, and half-elves) can see objects twice as far away as the given radius. Double the effective radius of bright light, normal light, and dim light for such characters.

Characters with darkvision (dwarves and half-orcs) can see lit areas normally as well as dark areas within 60 feet. A creature can't hide within 60 feet of a character with darkvision unless it is invisible or has cover.

Breaking and Entering

When attempting to break an object, you have two choices:

1. Smash it with a weapon.
2. Break it with sheer strength.

Smashing an Object

Smashing a weapon or shield with a slashing or bludgeoning weapon is accomplished with the sunder combat maneuver (see Combat). Smashing an object is like sundering a weapon or shield, except that your combat maneuver check is opposed by the object's AC. Generally, you can smash an object only with a bludgeoning or slashing weapon.

Breaking Items

When a character tries to break or burst something with sudden force rather than by dealing damage, use a Strength check (rather than an attack roll and damage roll, as with the sunder special attack) to determine whether he succeeds. Since hardness doesn't affect an object's Break DC, this value depends more on the construction of the item than on the material the item is made of. Consult Table: DCs to Break or Burst Items for a list of common Break DCs.

If an item has lost half or more of its hit points, the item gains the broken condition and the DC to break it drops by 2.

Larger and smaller creatures get size bonuses and size penalties on Strength checks to break open doors as follows: Fine –16, Diminutive –12, Tiny –8, Small –4, Large +4, Huge +8, Gargantuan +12, Colossal +16.

Note: Oil provides a +2 circumstance bonus on checks to open stuck doors and locks (Source Dungeoneer's Handbook.)

A crowbar or portable ram improves a character's chance of breaking open a door (see Equipment).