Router hardware‎ > ‎

Domino Pi






Overview

Domino Pi is a low-cost, compact OpenWRT-based 802.11 bgn WiFi development board based on Qualcomm/Atheros AR9331 WiSoC.

The Domino Pi board extends the Domino Core module by adding the following features:

Integrated USB ⇔ UART bridge for serial port (default to U-Boot / Linux console)
Integrated +5 V input / +3.3 V output, 2 A DC/DC power supply
Integrated 2.4 GHz WiFi PCB antenna
Integrated Jumpstart push button
Integrated Power and Wireless LEDs
Integrated 2x 28 pin, 2.54 mm pitch headers

The dual edge headers provide:

USB 2.0 (host or slave)
2 x 10/100MB Ethernet ports
SPI (MOSI, MISO, CLK, CS)
I2S (CK, WS, SD, MCK, MICIN)
SLIC
SPDIF Output
JTAG (TMS, TCK, TDI, TDO)
9x LEDs (also used for bootstrap settings)
Up to 29 x GPIOs (multiplexed with other functions above)




The base board (top view)


Base board (side view)


Dual NIC and USB extention boards on top of the baseboard


Single NIC and Flash chip programmer


http://www.gl-inet.com/w/?page_id=637