Hardware

• Core ARM9 Atmel SAM9G35 400Mhz
• 128MB SDRAM DDR2
• 256MB NAND
• 1x Ethernet 10/100
• 1x USB Host 2.0
• 1x USB Host 1.1
• 1x USB Host/Device 2.0
• 1x microSD
• 1x RS232
• 1x RS485
• 1x realtime clock
• 1x I2C
• 2x SPI
• 1x Wifi (optional)
• 1x LCD (optional)
• 1x Arduino Mega 2560 fully compatible system

Power supply 5V USB/external

LCD Supported

• LVDS/TTL Connection
• Touchscreen
• Driver backlight LED

Peripherals Supported

• Smartcard ISO/IEC 7816
• RFID UHF
• GSM/GPRS
• Z-Wave
• MODBUS Sensors/Actuators

Prerequisite

You need a preformatted microSD in order to have a running system. Also, if you need system’s console, you must connect a type B-micro USB cable to the serial console connector.

Note: This extension is derived from Arduino Mega 2560 system and is NOT connected to Arduino’s Project! So every tech request must be directed to us!