Thiết bị đo dòng dò
1.kyoritsu 5410 THÔNG SỐ KỸ THUẬT: Hãng sản xuất: Kyoritsu - Japan
Model: 5410 / K5410 Origin: Japan Giá bán: 12.780.000 vnđ The metering: x5, x1, x1 / 2, Auto Ramp
Nominal voltage:
+ 100V ± 10%
+ 200V +32% / -10%
+ 400V ± 10% (50/60Hz)
Line test:
+ 15/30/50/100mA (x5)
+ 15/30/50/100/200/500mA (x1 and x1 / 2)
+ 15/30/50/100/200/500mA (Auto Ramp)
Time of inspection:
+ 200ms (x5)
+ 2000ms (x1)
+ 2000ms (x1 / 2)
+ 300ms x 15 steps (Auto Ramp)
Accuracy
+ ± 1% rdg ± 3dgt (x1, x5, x1 / 2)
+ ~ +4% -4% (Auto Ramp)
Measure the voltage:
+ A Measurements: 80V ~ 450V (50/60Hz)
+ Accuracy: ± 2% rdg ± 4dgt
LCD Display
Source: DC 12V, R6P AA Battery x 8 units
Size: 186 x 167 x 89
Weight: 965G
Accessories: Wire match test, Battery, Manuals
Warranty: 12 months
| |
| • | Measurement of RCD trip time
Conducting testing of rated residual non-operating currents at × 1/2 Range, measuring RCD trip time at × 1 and × 5 Ranges. | | • | Measurement of trip out current
Measuring trip out current by varying current automatically. | | • | Remote Test
Enabling a user to hold the Test Leads with his both hands by locking the Test Button. Measurement will automatically start when the main voltage is detected. | | • | Voltage Measurement
Carrying out a constant measurement of voltage in the stand-by mode at each Range. |
| 
|
| • | Auto-detection of Contact voltage
Detecting the voltage to earth of Earth electrodes or Protective conductors during RCD test - when applying test currents - at measurement using EARTH in order to prevent electrical shocks caused by the damaged earth. Measurement will be ceased at AC50V or more. | | • | Dust- and Water-proof
Dust- and Water-proof construction (designed to IEC 60529 IP54). | | • | Backlight
Facilitating working at dimly illuminated locations. |
|
|  | | | | Measurement of RCD trip time - Measurement of trip out current | | Range | ×5 | ×1 | ×1/2 | AUTO RAMP (mA) | | Rated Voltage | 100V±10%
200V+32%/-10%
400V±10%
(50/60Hz) | | Test current | 15/30/50/100mA | 15/30/50/100/200/500mA | 15/30/50/100/200/500mA | | Measuring range | Testing time
200ms | Testing time
2000ms | Testing time
2000ms | 40%~110% of lΔn
(goes up by 5%)
Testing time
300ms × 15steps | Accuracy
(Trip Time) | |±1%rdg±3dgt | |±1%rdg±3dgt | |±1%rdg±3dgt | Test Current
at each step
-4%~+4% | Accuracy
(Test Current) | |+2%~+8%dgt | |+2%~+8%dgt | |-8%~-2%dgt | | Voltage Measurement | | Measuring range | 80V~450V (50/60Hz) | | Accuracy | |±2%rdg±4dgt | | | | Applicable Standard | IEC 61010-1 Pollution degree2 CAT.III 300V / CAT.II 400V
IEC 61010-031
IEC 61557-1, 6
IEC 60529 (IP54) | | Display | 1999 counts (3 1/2digits), Large LCD | | Operating temperature & humidity | 0ºC~40ºC, relative humidity 85% (no condensation) | | Storage temperature & humidity | -20ºC~60ºC, relative humidity 85% (no condensation) | | Withstand Voltage | AC3700V / 1 min. (between electrical circuit and enclosure) | | Insulation resistance | 50MΩ or more / 1000V (between electrical circuit and enclosure) | | Sleep Function | | (1) | Automatically enters Sleep mode in 3 minutes after the last switch operation (current consumption 75µA). This function doesn't work at voltage measurements. To exit from the Sleep mode, set the Function switch to OFF position once, and re-set it to the Range at which a measurement to be conducted. | | (2) | Backlight turns off in 1 minute after it lights up. |
| | Power Source | DC 12V / Size AA battery R6P (SUM-3) × 8 pcs. | | Dimension | 186(L)×167(W)×89(D)mm | | Weight | Approx. 965g (including batteries) | | Possible number of Measurements | 1200 times or more
(measure every 30 seconds at ×1/2 Range, lΔn=100mA) | | Accessories | 7128A (Test leads)
7129A (Test lead with alligator clip)
8017 (Long pin) × 2
Cord case, Strap belt, Instruction manual,
Size AA battery R6P(SUM-3)×8pcs. |
|
|
2.kyoritsu 5406A THÔNG SỐ KỸ THUẬT: Hãng sản xuất : Kyoritsu - Nhật
Model: 5406, K5406A Xuất xứ : Nhật Giải đo : x5, x1, x1/2, Auto Ramp
Dòng kiểm tra :
10/20/30/200/300/500mA
Thời gian kiểm tra :
+ 1000ms, 200ms (×5)
+ Độ phân giải thấp nhất : 1ms
Độ chính xác
+ ±0.6%rdg±4d
Điện áp hoạt động :
+ 230V+10%-15% |(195V~253V) 50Hz
Hiện thị LCD
Nguồn : DC 12V, Pin AA R6P x 8 chiếc
Kích thước : 186(L) × 167(W) × 89(D)mm
Cân nặng : 800g
Phụ kiện : Dây đấu kiểm tra, Pin, HDSD
Bảo hành : 12 tháng Giá bán: 5.070.000 vnđ
| • | Custom microprocessor controlled for highest accuracy and reliability. | | • | 3 LEDs for checking correct wiring status. | | • | 0 and 180 degree phase angle switch permits quick tests and consistent readings. | | • | Digital read-out of tripping time. | | • | Constant current source circuitry ensures that a fluctuating mains voltage does not affect the accuracy of readings. | | • | Large custom digital display readout. | | • | Visual indication of reversed phase and neutral wiring at socket. | | • | Designed to IP54 Rating. | | • | Complies with IEC 61557 |
| 
|
| • | Test of a large kind of RCD's: Standard, Selective, AC and A (DC sensitive breakers) |
|
|
| Rated Tripping Current | |10/20/30/200/300/500mA | | Fault Condition Settings | |× 1/2, × 1, × 5, × DC,
|AUTO RAMP | | Trip Current Duration | |1000ms, 200ms (×5) | | Lowest Resolution | |1ms | | Trip Time Accuracy | |±0.6%rdg±4dgt | | Operating Voltage | |230V+10%-15%
|(195V~253V) 50Hz | | Safety Standard | |IEC 61557-1,-6
|IEC 61010-1 CAT.III 300V
|IEC 61010-2-031 Pollution Degree 2 | | Withstand Voltage | |3700V AC for 1 minute | | IP Rating | |IEC 60529-IP54 | | Dimensions | |186(L) × 167(W) × 89(D)mm | | Weight | |800g approx. | | Accessories | |Molded plug test leads
|Pouch for test leads
|Shoulder Strap
|Instruction Manual | | Optional | |7121B (Simplified measurement probe) |
3. kyoritsu 5402D
| |
| • | Accurate digital readout of tripping time. | | • | Two neon lamps give quick check for correct wiring. | | • | Compact, lightweight and simple to operate. | | • | Zero cross circuitry permits testing at 0 and 180 degree portion of sine wave. At these two tests minimum (best) and maximum (worst) trip times will be displayed. |
| 
|
| | | | | Rated Tripping Current | 5/10/30/100/300/500mA | | Fault Condition Settings | × 1/2, × 1, Fast (250mA) | | Trip Current Duration | 2000ms, 40ms (Fast Trip) | | Lowest Resolution | 1ms | | Trip Time Accuracy | |±2%rdg±3dgt | | Operating Voltage | 220/230/240V 50Hz/60Hz | | Withstand Voltage | 2200V AC for 1 minute | | Dimensions | 140(L) × 90(W) × 20(D)mm | | Weight | 350g approx. | | Accessories | 7019 (Test Leads)
Carrying Case
Instruction Manual |
|
|
|
|
