Publications

Journal Publications

Published –

  1. Chang, C. M., Chou, J. Y., Tan, P., and Wang, L. (2017). “A sensor fault detection strategy for structural health monitoring systems.” Smart Structures and Systems, 20(1), 43-52. (DOI)
  2. Tan, P., Huang, J., Chang, C. M., and Zhang, Y. (2017). “Failure mode of isolated continuous girder bridge.” Engineering Failure Analysis, 80, 57-78. (DOI)
  3. Chang, C. M., Strano, S., and Terzo, M. (2016). “Modelling of hysteresis in vibration control systems by means of the Bouc-Wen model.” Shock and Vibration, Article ID 3424191, 14 Pages. (DOI: dx.doi.org/10.1155/2016/3424191)
  4. Terzo, M., Chang, C. M., Dimirovski, G. M., Lang, Z. Q., and Strano, S. (2016). “Vibration control of systems in presence of hard nonlinearities - Editorial.” Shock and Vibration, Article ID 1923574, 2 Pages. (DOI: dx.doi.org/10.1155/2016/1923574)
  5. Shi, P. Wu, B., Spencer, B. F., Jr., Phillips, B. M., and Chang, C. M. (2015). "Real-time hybrid testing with equivalent force control method incorporating Kalman filter." Structural Control and Health Monitoring, 23(4), 735-748. (DOI: 10.1002/stc.1808)
  6. Chang, C. M., Frankie, T. M., Spencer, B. F., Jr., and Kuchma, D. A. (2015). “Multiple degrees of freedom positioning correction for hybrid simulation.” Journal of Earthquake Engineering, 19, 277-296. (DOI: 10.1080/13632469.2014.962670)
  7. Tan, P., Fang, C., Chang, C. M., Spencer, B.F., Jr. "Dynamic characteristics of novel energy dissipation systems with damped outriggers." Engineering Structures, 98, 128-140. (DOI: 10.1016/j.engstruct.2015.04.033)
  8. Asai, T., Chang, C. M., and Spencer, B. F., Jr. (2015). "Real-time hybrid simulation of a smart base-isolated building." ASCE Journal of Engineering Mechanics, 141(3), 04014128. (DOI: 10.1061/(ASCE)EM.1943-7889.0000844)
  9. Fang, C., Tan, P., Chang, C. M., and Zhou, F. (2015). “A general solution for performance evaluation of a tall building with multiple damped and undamped outriggers.” The Structural Design of Tall and Special Buildings, published online. (DOI: 10.1002/tal.1212)
  10. Chen, P. C., Chang, C. M., Spencer, B. F., Jr., and Tsai, K. C. (2015). “Adaptive model-based tracking control for real-time hybrid simulation.” Bulletin of Earthquake Engineering, 13(6), 1633-1653. (DOI: 10.1007/s10518-014-9681-2)
  11. Spencer, B. F., Jr., Chang, C. M., Frankie, T. M., Kuchma, D. A., Silva, P. F., and Abdelnaby, A. (2014). “A phased approach to enable hybrid simulation of complex structures.” Earthquake Engineering and Engineering Vibrations, 13(1), 63-77. (DOI: 10.1007/s11803-014-0240-2)
  12. Tan, P., Xu, K., Wang, B., Chang, C. M., Liu, H., and Zhou, F. L. (2014). “Development and performance evaluation of an innovative low-cost seismic isolator.” Science China Technological Sciences, 57(10), 2050-2061. (DOI: 10.1007/s11431-014-5662-6
  13. Abdelnaby, A. E., Frankie, T. M., Elnashai, A. S., Spencer, B. F., Jr., Kuchma, D. A., Silva, P. F., and Chang, C. M. (2014). “Numerical and hybrid analysis of a curved bridge and methods of numerical model calibration.” Engineering Structures, 70, 234-245. (DOI: 10.1016/j.engstruct.2014.04.009)
  14. Chang, C. M., Spencer, B. F., Jr., and Shi, P. (2014). “Multi-axial active isolation for seismic protection of buildings.” Journal of Structural Control and Health Monitoring. 21(4), 484-502. (DOI: 10.1002/stc.1579)
  15. Asai, T., Chang, C. M., Philips, B. M., and Spencer, B. F., Jr. (2013). “Real-time hybrid simulation of a smart outrigger damping system.” Engineering Structures, 57, 177-188. (DOI: 10.1016/j.engstruct.2013.09.016)
  16. Chang, C. M. and Spencer, B. F., Jr. (2013). “Hybrid system identification for high-performance structural control.” Engineering Structures, 56, 443-456. (DOI: 10.1016/j.engstruct.2013.05.011)
  17. Chang, C. M., Wang, Z., Spencer, B. F., Jr., and Chen, Z. (2013). “Semi-active damped outriggers for seismic protection of high-rise buildings.” Smart Structures and Systems, 11(5), 435-451. (DOI: 10.12989/sss.2013.11.5.435)
  18. Asai, T., Spencer, B. F., Jr., Imerura, H., and Chang, C. M. (2012). "Nature of seismic control force in acceleration feedback." Journal of Structural Control and Health Monitoring, (20)5, 789-803. (DOI: 10.1002/stc.1496)
  19. Chang, C. M. and Spencer, B. F., Jr. (2010). “Active base isolation of buildings subjected to seismic excitations.” Earthquake Engineering and Structural Dynamics, 39(13), 1493-1512. (DOI:10.1002/eqe.1040)
  20. Chang, C. M., Park, K. S., Mullenix, A., and Spencer, B. F., Jr. (2008). “Semiactive control strategy for a phase II smart base isolated benchmark building.” Journal of Structural Control and Health Monitoring, 15(5), 673-696. (DOI: 10.1002/stc.269)
  21. Loh, C. H. and Chang, C. M. (2008). “Application of centralized and decentralized control to building structure: Analytical study.” ASCE Journal of Engineering Mechanics, 134(11), 970-982. (DOI:10.1061/(ASCE)0733-9399(2008)134:11(970))
  22. Loh, C. H., Lynch, J. P., Lu, K. C., Wang, Y., Chang, C. M., Lin, P. Y., and Yeh, T. H. (2007). “Experimental verification of wireless sensing and control system for structural control using MR-dampers.” Earthquake Engineering and Structural Dynamics, 36(10), 1303-1328. (DOI:10.1002/eqe.682)
  23. Loh, C. H. and Chang, C. M. (2007). “MATLAB-based seismic response control of a cable-stayed bridge: cable vibration.” Journal of Structural Control and Health Monitoring, 14(1), 109-143. (DOI:10.1002/stc.87)
  24. Chang, C. M. and Loh, C. H. (2006). “Seismic response control of cable-stayed bridge using different control strategies.” Journal of Earthquake Engineering, 10(4), 481-508. (DOI: 10.1142/S1363246906002839)
  25. Loh, C. H. and Chang, C. M. (2006). “Vibration control assessment of ASCE benchmark model of cable-stayed bridge.” Journal of Structural Control and Health Monitoring, 13(4), 825-848. (DOI:10.1002/stc.62)  

 
Conference Publications
  1. Huang, S. K., Liao, Y., Chang, C. M., Loh, C. H., Kiremidjian, A., and Rajagopal, R. (2017). “Use of time-frequency damage sensitive features for structural damage diagnosis.” The 11th International Workshop on Structural Health Monitoring, Stanford, CA.
  2. Chang, C. M., Shia, S., and Yang, C. Y. (2017). “Design of buildings with seismic isolation using linear quadratic algorithm.” The X International Conference on Structural Dynamics, Eurodyn 2017, Rome, Italy.
  3. Chang, C. M., Shia, S., and Yang, C. Y. (2017). “Design of linear passive control systems for buildings using dynamic output feedback control method.” The 3rd Huxian International Forum on Earthquake Engineering for Young Researchers, Champaign, IL.
  4. Chang, C. M. and Huang, S. K. (2017). “Operational modal analysis of structures using frequency-domain stochastic subspace system identification.” The 13th International Workshop on Advanced Smart Materials and Smart Structures Technology, Tokyo, Japan.
  5. Yang, Y. Y., Chen, P. Y., Kang, S. C., Chang, C. M., Chiang, Y. C., Kou, and T. Y. T. (2017). “Crane-Based autonomous erection and assembly system.” 3rd International Conference on Civil and Building Engineering Informatics & 2017 Conference on Computer Applications in Civil and Hydraulic Engineering, Taipei, Taiwan.
  6. Shia, S., Chang, C. M., Yang, C. Y. (2017). “Passive base isolation design of seismically-excited buildings using linear quadratic approach.” 3rd International Conference on Civil and Building Engineering Informatics & 2017 Conference on Computer Applications in Civil and Hydraulic Engineering, Taipei, Taiwan.
  7. Chang, C. M. and Huang, S. K. (2017). “Damage diagnosis of seismically-excited buildings using dual matrix projection of time-frequency distributions.” 3rd International Conference on Civil and Building Engineering Informatics & 2017 Conference on Computer Applications in Civil and Hydraulic Engineering, Taipei, Taiwan.
  8. Chou, J. Y. and Chang, C. M. (2017). “A sensor fault detection strategy for structural health monitoring systems.” 3rd International Conference on Civil and Building Engineering Informatics & 2017 Conference on Computer Applications in Civil and Hydraulic Engineering, Taipei, Taiwan.
  9. Chang, C. M. and Huang, S. K. (2017). “Stochastic subspace system identification using multivariate time-frequency distributions.” Proceedings of the SPIE, Portland, OR.
  10. Chang, C. M. and Huang, S. K. (2016). “Matrix factorization to time-frequency distribution for structural health monitoring.” Proceedings of the SPIE, Las Vegas, NV.
  11. Chang, C. M. and Loh, C. H. (2015). “An improved system identification approach to enable structural health monitoring.” 2015 Joint AESE/ANCRiSST Conference, Champaign, IL.
  12. Chang, C. M. and Loh, C. H. (2015). "Improved stochastic subspace system identification for structural health monitoring."  The 11th International Conference on Damage Assessment of Structures, Belgium.
  13. Chen, P. C., Chang, C. M., Spencer, B. F., Jr., and Tsai, K. C. (2014). "Model-based tracking control framework for real-time hybrid simulation", The 12th International Conference on Motion and Vibration Control, Hokkaido, Japan.
  14. Chen, P. C., Chang, C. M., Spencer, B. F., Jr., and Tsai, K. C. (2013). “Improved model-based feedfoward and feedback control for real-time hybrid simulation.” 5th International Conference on Advances in Experimental Structural Engineering, Taipei, Taiwan.
  15. Chang, C. M., Frankie, T. M., Silva, P. F., Sanders, D. H., Kuchma, D. A., and Spencer, B. F., Jr. (2013). “Hybrid simulation of a seismically-excited four-span curved bridge.” 5th International Conference on Advances in Experimental Structural Engineering, Taipei, Taiwan.
  16. Spencer, B. F., Jr., Kuchma, D. A., Elnashai, A. S., and Chang, C. M. (2013). “Advances and Innovations at the Multi-axial Full-scale Substructure Testing and Simulation (MUST-SIM) Facility.” 5th International Conference on Advances in Experimental Structural Engineering, Taipei, Taiwan.
  17. Frankie, T., Abdelnaby, A., Silva, P., Sanders, D., Elnashai, A., Spencer, B., Kuchma, D., and Chang, C. M. (2013) Hybrid Simulation of Curved Four-Span Bridge: Comparison of Numerical and Hybrid Experimental/Analytical Results and Methods of Numerical Model Calibration. Structures Congress 2013: pp. 721-732
  18. Chang, C. M., Frankie, T. M., Silva, P. F., Sanders, D. H., Kuchma, D. A., and Spencer, B. F. Jr. (2013). “Hybrid testing of a four-span curved bridge.”  10th CUEE Conference, Tokyo, Japan.
  19. Chang, C. M., Bletzinger, M. E., and Spencer, B. F., Jr. (2012). “High-precision displacement control for hybrid simulation.” International Conference on Earthquake Engineering Research Challenges in the 21st Century, Harbin, China.
  20. Chang, C. M. and Spencer, B. F., Jr. (2012). “Multi-axial active isolation for buildings against earthquakes.” 9th CUEE and 4th ACEE Joint Conference, Tokyo, Japan. (Best Presentation Award)
  21. Wu, B., Shi, P., Spencer, B. F., Jr., Philips, B. M., and Chang, C. M. (2011). "Real-time hybrid testing with equivalent force control method incorporating Kalman filter." The Workshop of the Asian-Pacific Network of Centers for Research in Smart Structures Technology (ANCRiSST-2011), Harbin, China.
  22. Shi, P., Wu, B., Philips, B., Chang, C.M., and Spencer, B. F., Jr. (2011). "Time delay compensation with equivalent force control method incorporating Kalman filter." 4th International Conference on Advances in Experimental Structural Engineering, Ispra, Italy.
  23. Chang, C. M. and Spencer, B. F., Jr. (2010). “An experimental study of active base isolation control for seismic protection.” Proceedings of the SPIE, San Diego, CA.
  24. Wang, Z., Chang, C. M., Spencer, B. F., Jr., and Chen, Z. (2010). “Controllable outrigger damping system for high rise building with MR dampers.” Proceedings of the SPIE, San Diego, CA.
  25. Chang, C. M., Wang, Z., and Spencer, B. F., Jr. (2009). “Application of active base isolation control.” Proceedings of the SPIE, San Diego, CA.
  26. Zhang, Y., Caicedo, J. M., Sim, S. H., Chang, C. M., Spencer, B. F., Jr., and Guo, X. (2008). “Modal identification of Bill Emerson bridge.” 14th World Conference on Earthquake Engineering, Beijing, China.
  27. DeVore, C., Chang, C. M., and Spencer, B. F., Jr. (2007). “Active base isolation of building structures in two dimensions.” Proceedings of the 2007 Earthquake Engineering Symposium for Young Researchers, Seattle, WA.
  28. Loh, C. H. and Chang, C. M. (2006). “Decentralized versus centralized control study for large civil infrastructural systems.” 4th World Conference on Structural Control and Monitoring, San Diego, CA.
  29. Loh, C. H., Lynch, J. P., Chang, C. M., Lu, K. C., and Lin, P. Y. (2006). “Application of wireless active sensing units to control a structure using MR-dampers.” 17th International Conference on Adaptive Structure and Technologies, Taipei, Taiwan.
  30. Chang, C. M., Liao, W. I., and Loh, C. H. (2006). “Identification of frame structure embedded with shape memory alloy.” 19th KKCNN Symposium on Civil Engineering, Japan.
  31. Loh, C. H. and Chang, C. M. (2005). “Assessment of semi-active control strategies for MR dampers: Application to ASCE benchmark model of cable-stayed bridge.” 5th International Conference on Structural Stability and Dynamics, Kissimmee, FL.
  32. Loh, C. H. and Chang, C. M. (2005). “Vibration control of cable-stayed bridge using MR-dampers: MATLAB-based approach.” International Conference on Safety and Reliability of Engineering Systems and Structures, Rome, Italy.
  33. Chang, C. M. and Loh, C. H. (2005). “MATLAB-based seismic response control of cable-stayed bridge: Considering cable vibration.” 4th KU-KAIST-NTU Student Seminar on Civil Engineering Research, Korea.
  34. Chang, C. M., Yeh, T. H., and Loh, C. H. (2005). “Comparison on control effectiveness between centralized and decentralized control of high-rise building.” 18th KKCNN Symposium on Civil Engineering, Taiwan.
  35. Loh, C. H. and Chang, C. M. (2004). “Assessment of semi-active control strategies for MR-damper: Application to building structure.” 7th International Conference on Motion and Vibration Control, St. Louis, MO.
  36. Chang, C. M. and Loh, C. H. (2004). “Assessment of semi-active control strategies for MR dampers: application to building structure.” 3rd KU-KAIST-NTU Student Seminar on Civil Engineering Research, Japan.

 

Technical Report

  1. Chang, C. M. and Spencer, B.F., Jr. (2011). “Multi-axial active isolation for seismic protection of buildings.” Newmark Structural Engineering Laboratory (NSEL) Report Series, University of Illinois at Urbana-Champaign, Urbana, IL, http://hdl.handle.net/2142/30839